I have a CEL on for the codes lean bank 1 and lean bank 2. I have done some research and found that there is the little hose that is under both upper intakes that needs to be replaced. I have the parts and I am donig the work tomorrow, but this is the second time I will have to take all that stuff off to get to somthing under the intake, I have done the Plugs, all 6 coils and the VC gaskets already. I want to know if there is anything else that i should replace fix whatever while i ahve the intake off. I DO NOT to EVER have to take the intake off again. So any input from you guys would be great.
Thanks,
Elisha
Thanks,
Elisha