Pinouts for the OBDII connector

[ovsims]

Anybody got the pinouts for the obd2 connector in a 2000 LS

 

[Quik LS]

it's standard ODBII - call cars since 1996 use the same connector, most Fords use the same pinouts, but there are differences between brands.

I hope you are not planning to connect into it directly - it is a bus interface, meaning you have to have an 'box' to interface properly with the bus, pulling/pushing data and the someway to reverse engineer the data into meaningful usable data.

there are lot of DIYer projects on the net that build their own simple ODBII reader....

 

[ovsims]

The reason I asked was becasue I bought a Laplogger OBDII reader and it keep saying no data make sure key is on. I wanted to make sure the pins on the connector match up to where they suppose to because they sell brand specific readers and I might not have the right one I just wanted to be sure before I sent it back.

 

[Quik LS]

http://en.wikipedia.org/wiki/OBD-II

 

[beaups]

what year is your ls? if it's 03+ using CAN protocol your unit may not be compatible.

 

[Quik LS]

he said 2000 in his first post