ouch broke my mirror off

[whosmikebyrd]

how hard is it to replace driver whole mirror? also how to get the old broken one out.

 

[Quik LS]

pop the interior panel off
pop the plastic liner covering the mirror mounting bolts off
disconnect the wiring
unbolt the mounting bolts (three of them)

 

[owlman]

Remove the door trim panel inside, then there are 3 nuts that hold the mirror on.
At least that's what the workshop manual says!

edit: d'oh, too slow

 

[NYC LS8]

You could always go with the ever popular bicycle mirror mod...

 

[whosmikebyrd]

thanks but do i force it off and it just comes off? or do i need to use a screw driver or something to wedge it out i dont want to break more things. na dno thanks bike mod lol

 

[Quik LS]

what are you taking about?

 

[whosmikebyrd]

the plastic panel inside the door it comes off jus by pulling it? or are there clips that i need to wedge off or something?

 

[owlman]

the plastic panel inside the door it comes off jus by pulling it? or are there clips that i need to wedge off or something?

Front door trim panel

 

[whosmikebyrd]

ok i just got my mirror in the mail and i need to know what does this mean if you click on the link above this post.

NOTE: Using a suitable tool, insert 2-3 mm (0.78-0.118 in) and rotate to disengage the snap feature.

i think i removed all screws but that NOTE is concerning me does it just pop off if i pull?