antonio fuller
Well-Known LVC Member
After installing the alpine I get a apply park brake , foot on brake message in the message center any idea what's going on hear
Now to the next issue foot on brake apply p
- Thread starter antonio fuller
- Start date
antonio fuller
Well-Known LVC Member
I discounted the radio and I still get the same
lincolnelite
Well-Known LVC Member
probably you disconnected some wire in the center console especially near the parking brake and advance track.
jjcool00
Dedicated LVC Member
You might've accidentally pressed the parking brake down which I think can sometimes cause this. I've had this happen once or twice, and there is a reset procedure (search for it - I don't remember which thread has it but you'll find it). If the reset procedure doesn't work you'll need a new module.
joegr
Dedicated LVC Member
You disconnected the battery. That's all that has happened.
You just need to follow the message center instructions so that the parking brake module can relearn it's values. After that, it won't bother you again.
You just need to follow the message center instructions so that the parking brake module can relearn it's values. After that, it won't bother you again.
antonio fuller
Well-Known LVC Member
Wow me in my ls or in a full relationship I think she was mad because I started taking her apart in the cold it was because the bat was disconnected lol never had that happen b4 had to hold the foot brake down and the park brake up then releases park brake and it cleared She really hates me
That's normal procedure when replacing (or disconnecting) the battery with the electronic parking brake. No reason to be concerned or miffed.
antonio fuller
Well-Known LVC Member
Didn't have the electric one one the 01 lesson learn
Yea... It's an electronic parking brake only thing.