Neon 3rd Brake light removal

[98markviii]

This is probably a really easy procedure but I have no idea how to do it lol does anyone have any instructions (or better yet, pictures) on how this is done? It doesn't work anymore so I was going to try to get a new inverter for it.

 

[Bangster]

You need to remove the trunk lid liner (or at least the part that attaches to the back), and everyplace in this picture there is a hole there is a nut on a stud. Make sure you don't drop them in the trunk lid, because you will never see them again.

Disconnect the connector to the inverter before removing the panel.

To get the inverter off I had the cut the head off this screw:

don't forget to add the drain holes, I think that no matter where you live (rainy, dry, etc) that you want to do that. Mine was full of water all the time, but now I never see water in there.

 

[Sapperfire]

Remove the rear deck carpet, remove nuts holding Neon to deck. Unplug neon. Push the studs from the backside to push neon off of deck. Order Glitch Ballast, reinstall neon

 

[UltimateSVT]

What Sapp said