Don Pfau
Dedicated LVC Member
I remember reading a post years ago about what were the hottest computers and there code number and there basic specifications. But I'm having trouble finding it ??
Looking for a Post about Computer codes and there specs.
- Thread starter Don Pfau
- Start date
chris2523
93 Mark VIII
this?
W3Z3 WOT spark
6000.000 27.0
5000.000 24.0
3500.000 23.0
3150.000 19.0
3050.000 14.0
2500.000 12.0
2000.000 12.0
W3Z2 WOT Spark
6000.000 32.8
5000.000 29.0
3500.000 26.5
3150.000 22.3
3050.000 17.0
2500.000 15.0
2000.000 13.0
W3Z3 Rev Limit 6450
W3Z2 Rev limit 6850
W3Z3 1-2 shift 5600
W3Z2 1-2 shift 5600
W3Z2 speed limit (driveshaft revs) 16372= no speed limiter
W3Z3 speed limit (driveshaft revs) 5400 = max speed limited!
Shift pressure on the W3Z2 PCM is 15 PSI higher.
W3Z3 WOT spark
6000.000 27.0
5000.000 24.0
3500.000 23.0
3150.000 19.0
3050.000 14.0
2500.000 12.0
2000.000 12.0
W3Z2 WOT Spark
6000.000 32.8
5000.000 29.0
3500.000 26.5
3150.000 22.3
3050.000 17.0
2500.000 15.0
2000.000 13.0
W3Z3 Rev Limit 6450
W3Z2 Rev limit 6850
W3Z3 1-2 shift 5600
W3Z2 1-2 shift 5600
W3Z2 speed limit (driveshaft revs) 16372= no speed limiter
W3Z3 speed limit (driveshaft revs) 5400 = max speed limited!
Shift pressure on the W3Z2 PCM is 15 PSI higher.
Don Pfau
Dedicated LVC Member
Yes. Thank you very much
Don Pfau
Dedicated LVC Member
I would like the stats on more of the first generation computers for 93 to 94 if any body knows them or can find them. I want to raise the shift points on my supercharged Mark VIII with out getting it reprogramed. It has a SCT computer chip in the computer now and if I understand correctly it just alters the original program buy a programed amount. So if I find an orginal computer with higher shift points than the computer in it but with about the same timing I should be able to put the SCT chip into the new computer intall it and there by have raised my shift points ??
driller
Dedicated LVC Member
The way the SCT software works is a commanded rpm for WOT shift points.