Klasse High Gloss Sealant Glaze

I have some. It's aplication/removal is more difficult than some others that should last longer.

Get a bottle of Collinite 845 Insulator Wax. It's what I use for winter wax.

And, it's only about 15 bucks for a 16 oz bottle. Should yield about 32 coats.
 
pektel said:
I have some. It's aplication/removal is more difficult than some others that should last longer.

Get a bottle of Collinite 845 Insulator Wax. It's what I use for winter wax.

And, it's only about 15 bucks for a 16 oz bottle. Should yield about 32 coats.
Click to expand...

thanks pektel i was waiting for your response haha
 
No prob. Just make sure you really shake the bottle. It starts as a semi solid inside, but the more you shake it, the more liquid it becomes. You want it as liquid as possible, so you spread it on VERY thin. I apply to all the paintwork, then grab a towel and buff off right away. No need to let it haze. If you do, it becomes a real bitch to buff off.

2 coats will get you through winter.
 
+1 on what pektel said. I've had this stuff for a while and plan on trading it off. It's a PITA to remove, looks pretty good though. I wonder if I can even trade it at this point, it's like 1.5 years old.
 
I have no issues with it...I think a big problem is most folks do not put it on thin enough. It is great, especially if you want it up over a few coats.
 
I like Colinite 476 it's the paste version of 845. I find it's easier to use than 845. I melt a little 476 in my bare hands and rub it on the paint then I wipe it off with a microfiber towel. I live in an industrial environment and it will bead water for over 6 months. Both products are great.
 
+1 for 845... As soon as I get some more time on my Blackfire Wet Diamond to see about durability I'd recommend it too... great sealant.
 
Where you guys find this high end stuff? Is it handled in any local stores or do i got a get it online?
 
ok, colonite like pete said..... and for the ugly comment, id rather tint half the tails then paint my engine plastics like a ninja turtle
 
SPSully said:
ok, colonite like pete said..... and for the ugly comment, id rather tint half the tails then paint my engine plastics like a ninja turtle
Click to expand...

never saw a ninja turtle paint before, do you see this alot in canada?

untitled.jpg
 
JoshMcMadMac said:
I have no issues with it...I think a big problem is most folks do not put it on thin enough. It is great, especially if you want it up over a few coats.
Click to expand...

That's true as well. I've only used it a handful of times but I find a lot of other things much easier to use, better looking, cheaper, and longer lasting. As you can tell, I don't need anything else to push me over the edge.
 
You must log in or register to reply here.

Members online

Total: 236 (members: 1, guests: 235)
Back
Top