I was just offered a kenny bell for 100.00. It looked like the twin screw that everyone has. I know it is for a mustang. Is there any identifying marks as far as the model I need goes? I have done some searches but have come up empty handed on this info. TIA>
Kenne bell
- Thread starter 1bad4.6l
- Start date
Screw-Rice
Dedicated LVC Member
I would assume it has a serial number on it, or a model number you can search. Might have to call Kenne Bell to get the right info.
is it just the blower or a whole set up? There is a stamping on the drivers side of the seal plate that will tell you the size. All i can tell you that mine says mx422 4114 and is a 2.2. I "assume" and assume only that the 422 part means 4 valve 2.2 but you'd have to call KB to really see what you have and what it fits. Hell if it's anything at all i think it would be worth $100.
It is just a blower with a pulley on it. And that is what I was thinking. It looks like all the pics I've seen. From the bottom. There is alot involved I know. But this is how My projects usually start. The number stuff really helps.
1994MarkVIII
Well-Known LVC Member
KB for $100! I would by that in a heart beat, and if it didn't work on your car you could sell if for a lot more.
you should really call kenne bell though, cause they won't seperate there kits. For example you will need the "open house" manifold for b heads, and they won't sell it seperately. You might be able to get around it, but i would try to figure that out before getting to involved. But for $100 i would have to think you could get rid of it and make money.
