Just finished custom projector foglights!

[WishyouhadaLS?]

Just installed these custom projector fogs, let me know what you think............im sorry this is my first thread cant figure out to put pics on

 

[Andrizzle]

Go to imageshack.us and upload them, then use forum code link and past it here.

 

[WishyouhadaLS?]

trying to upload pics

im sorry if im cluttering i think this will get the pics up

 

[trickett90]

I like this, care to do a write up?

 

[HighRule]

I like this, care to do a write up?

Yes please do. Looks good.

 

[Alax7]

What projectors did you use? Going to put the cover back on the fogs or leave it like that?

It looks good.

 

[WishyouhadaLS?]

Oh i thought you would never ask, first off i bought a universal projector kit off ebay 60 bucks, baked the fogs open just like the headlights, the projectors come in two pieces the back connect to the front with a bulb in the middle, i opened it up yanked the bulb out and put my l.e.d foglights bulbs in ( basic + to the + and - to the -) took the back of the housing and measure the hole to cut for the projector to fit through. pushed it in from the back(i painted the inside of my foglight black do that first if you choose) put a couple set screws to hold it in place, put sealant on the back and re assembled the projector (long story short cut a hole push it through and seal it)...the white '' BEZZEL" is actually one from a set of undercabinet lights from home depot just cleaned the look up a bit. now for the finished product i havent decided if i want to put the clear housing plastic for the whole foglight back on, i know 2 hours of driving and both projectors will have rocks throught them, but my plastics are so hazy. any suggestions on where to get new plastic covers?

 

[WishyouhadaLS?]

got to ebay and search " retrofit universal projectors'' the prices go from 60 to 120 depending on halogen or hid...in my case 3.99 for the led fogs did the trick and no heat!

 

[Alax7]

Did you compare the hid bulb vs the led in the projectors? I ran projectors fog lights in my ls for a few days and the light ouput was pretty good for some cheap projectors.

You wont find just lenses to buy new. You'll need to buy the whole fog light or restore your lense.

refinishing lights with uv protection.

http://www.lincolnvscadillac.com/showthread.php?t=74933&highlight=helmsman

Or you can just use a 3m kit without the uv protection.