Just bought a 98 LSC need some help

A

Amish Electrician

Active LVC Member
Joined
Feb 21, 2009
Messages
74
Reaction score
0
Location
Kansas City
Hey guys Im back on LVC I sold my LS for a mustang now I just bought a 98 LSC with 97k on it pearl white with Octostars (will try to get pics up later) got it for 2850...now the car is all stock so I think..only problem I see with the car and idk if its a problem at 70mph it sits at like 2700rpm cruising down the road. Trans shifts fine and when i press the O/D off it jumps up like it suppose to I just feel that it should not be that high. I only got like 21.5mpg on the 250 miles trip home could it be possible it has 4.10 gears in it. What does everyone elses sit at at 70mph? Any info would be helpful thanks guys.
 
You can use a gear calculator, or do it the old school way. Lift the rear up, throw it in neutral and count how many times the pinon spins on a full rotation of the tire.
 
I really don't want those gears I do a lot of highway driving..what do I need to do to go back to stock or like 3.55s ..where can I get the parts and stuff?
 
Amish Electrician said:
I really don't want those gears I do a lot of highway driving..what do I need to do to go back to stock or like 3.55s ..where can I get the parts and stuff?
Click to expand...

I have a set of stock 3.27's sitting in my storage building, I will trade you straight up:).
 
If I bought a car with 4.30 gears and I didn't know about it Id kill myself.:D

This is an excellent reason to install a T-56 tranny.
 
Find a member that lives around you w/ stock gears and the ability to switch out the pumpkins between cars. It's a win win for both parties.
 
this sucks idk what to do i don't even know what they are exactly the the gear calculators Ive used say around 4.10s to 4.30s..those gears have to be hard on the car
 
Where in Kansas city are you I'm up north near zone rosa I'd ba happy to trade yu my 327 for your 4 whatever you have. Pm me and I'll send you my phone number!
 
Amish Electrician said:
this sucks idk what to do i don't even know what they are exactly the the gear calculators Ive used say around 4.10s to 4.30s..those gears have to be hard on the car
Click to expand...
I have 4.10's and no, they are not hard on the car.
 
Jeez don't you hate it when you think you're buying a completely stock car, you realize you were just suckered when you drive away from seller?

Happened to me with my 98 Cobra... All stock, until I felt that the RPM's weren't right either. Turned out to have 3.73's (I was disappointed they were not 4.10+ )

Better check your car for any signs of Nitrous use
 
I have a whole pumpkin out of my gen one with 3:08 gears that I would give you if you were closer.
 
You must log in or register to reply here.

Members online

No members online now.
Total: 174 (members: 0, guests: 174)
Back
Top