i need screw head size?

[turn_on68]

I am going to the Ins. Co's. Yard where my totaled car is. I want to swap my new air suspension relay with an older used one I have. Does anyone know what size small socket fits the screw heads? 1/4 or 3/8 or is it metric?

 

[chris2523]

i don't know specifics, but i very rarely (if ever?) use standard sizes on the mark. its almost all metric.

 

[66coupe]

If it's the part I'm thinking it's a 7 mm socket

 

[Sapperfire]

Only standard sizes on a Mark are the brake
And trans lines fittings

 

[DLF]

And the differential, inside and out.

 

[AndyT]

Good to know....

 

[BAD97LSC]

the screws on the relay are 7 mm

 

[k9t8m]

7mm or 8mm. Bring both just in case.

 

[BAD97LSC]

7 mm

 

[NoLimit95]

7.1 mm.....

 

[keatonsdad]

5/16

 

[turn_on68]

Thanks to all replies. I couldn't get to the air sus. relay without getting down and dirty. I did get the ABS relay. Between the accident and the wreckers lifting belts the whole frt.bumper cap was falling off.
I have bought another '98 Mark black on black just like I had but no sun roof and 116,000 miles for the same amt. that St. Farm gave me. I'm out $450 for the del. chg. From Fla. To Tx. 1 car owner clear car fax. I have so many parts and experience keeping these cars running I just couldn't jump into $5000 in debt with a used Jap car for only 5mpg.better.
Does anyone have any recommends on used car power train warranty. I have a quote for $2000 5yrs 100,000 addtl. Miles with $100 ded.