how to remove seats without power

[dnehthend]

I can't get to the rear bolts without moving the seats forward, I've even removed the seat skins and padding.

Is there anything I can run 12v to to get it moving forward?

Couldn't find anything by searching

 

[bobotech]

My seats were like that when I fixed mine. They both had broken wires making them stay in the rear position.

Anyway, I just ended up using a wrench which took forever.

 

[marco]

The nuts are two different sizes, don't remember what they are but I had the same problem. I used a wrench the open ended side, I had some luck with getting a ratchet with a deep well socket in there but gave up because of lack of space.

 

[NoLimit95]

19MM and 13MM and it can be done because the seats that I took out of my 94 had no power and were all the way back. I used a ratchet and it was hell but I managed. Go somewhere that has an air ratchet and let them loosen the nuts for you and or remove them for you.

 

[danny_holtermann]

you can hot wire it, take the seats off, and just figure out which wires go to the motor, the motor is the front one of the three motors