DunItRight
Dedicated LVC Member
Best Buy and Circuit City:yuck: both want $1K or more and you send out the headrests.
4 coils, 2 valve cover gaskets, 2 oil changes, and a fuel filter... Bout 300 bucks in repairs/general maintenance since May.
Future planned repairs will be new sway bar bushings after it gets warm, and a new thermostat and coolant flush. I guess I can count snow tires into that as well. So maybe another 450 or so before the one year mark.
Oh, I forgot about the 20 new lug nuts, another 60 bucks or so to the tab.
$360 isn't too bad for the first 6 months, considering that I sunk that much on average into my Cadillac EVERY month for the last 6 months I owned it, and it still needed more when I traded the damned thing in.
Most of my repairs have been done while the '02 LS was under warranty.
If you want to think of them as repairs--
First replacement set of Michelins---about $1300
Set of ceramic brake pads---about $120
Replaced one coil---about $50
Clock spring needs replacing---?$
Almost all mods have been through sponsors---
LSK Intake
MagnaFlow exhaust
NX Pro 300 HP-capable system
Completely separate methanol delivery system
a. five gallon fuel cell
b. two billet filters and electric fuel pump
c. all stainless-braid teflon hose for supply and return
d. bypass pressure regulator
e. SCT Flash system
f. five tanks full of nitrous oxide per weekend
The custom-bent roll cage cost $3500.00
The mandatory fire-suppression system cost $350.00
Simpson seat belt cost $250.00
Simpson suit, helmet and accoutrements about $2500.00
Material for belly-pan cost about $100.00
Z-rated Michelin P-2 tires on 8 1/2 inch by 18 inch wheels about $2300.00
Methanol about $34 for five gallons
116 octane leaded race gas about $11 per gallon
Setting four Maxton Land-Speed Records with my daily driver---PRICELESS
(I set a record, reset that record, and then reset it again.)
Now stands at 140.106 MPH for the Maxton Mile---class E/FCC
Then I changed from methanol to race gas and set another record--138.454 MPH in E/FSS
By next season I will be running a 4.XX litre Jag engine and a pair of turbos to go with the 'spray'
Go-Fast is addictive.
KS
Completely stock interior. I have to go through 'monkey-motion' to fold down the visors and revise the hinge system for the glove box. (Maybe Dzus fasteners?) The rear seat-back only goes to about 30 degrees before hitting the roll cage and back-seat foot-room is somewhat compromised. I am a contract writer for Primedia Group so the entire story must first appear, in this case, in Turbo and High-Tech Performance Magazine. I'll show a couple of non-magazine photos and the time slips as soon as I figure our how it's done here!Got any pictures? Have you gutted it?