Here ya go brandon

XLRVIII

XLRVIII

Dedicated LVC Member
Joined
Mar 22, 2004
Messages
5,952
Reaction score
0
Location
Houston
See what I mean?

sidebyside.jpg
 
As this is a public forum, I suggest you let everyone know what they are looking at. Looks like you are datalogging your load %. The screen is really small though...
 
98LSC32V said:
As this is a public forum, I suggest you let everyone know what they are looking at. Looks like you are datalogging your load %. The screen is really small though...
Click to expand...

the person this was addressed to knows what he's looking at.

The screen is small because I had two datalogs open side by side on my dual monitors.

We were discussing 1-2 shift points, and accleration rate both before and after the shift....
the 6000 shift point is slower both before and after the shift than the 6300RPM 1-2 shift.

Also we were looking at the knock sensors pulling timing, quickly realized it was doing "what it was supposed to do" based on how I have my tune set up.

The car did pull .75 degree's of timing, but that was WHILE it was in the middle of adding a 2 full degree's..
It was just optimizing the spark as the tune is instructed to do via the Knock sensors.

I can post full sized images..

hell I can post the datalog files themselves and you can look at them in livelink.
 
Oh oh oh! I want datalog files! Lol. I haven't got to datalog my car in a while because of school, but I always like looking at other people's logs.
 
Kraze, I'm getting ready to leave the office.
I'll post the datalog files for both those runs tomorrow.

If brandon gets bored he's got the quicker of the two passes on his machine..and I BELEIVE he had my july 9.97 run as well.

If he doesnt post them tonight.. I'll post them tomorrow
hang in there.

I'm a data junkie too...(lol)
 
Sounds good, thanks. And I think I already have you're july 9.97 run too lol.
 
You must log in or register to reply here.

Members online

No members online now.
Total: 1,049 (members: 0, guests: 1,049)
Back
Top