Help!! Vibrating wont go away!!! Vid inside

[blackheart102001]

Ive created another thread called Hard shaking Ls, and explained my troubles. I got my car looked at by the local Lincoln service dealer and they let me know i need a hub assy. because i had bad bearings. Ok so I changed that twice! and the cv, but that infernal buzzing wont go away. I balanced the tires and all
YouTube- video-2010-02-16-16-34-35
The sound is bad bc it was done on phone but the buzzing is coming from the right rear i think where i changed the parts.

ANY SUGGESTIONS PLEASE

my next stop is a 1100 repair at the service center (one that i really cant afford)

 

[tireman]

first of all

what is your your check engine light doing on? Go to auto zone and have them scan it.

Not sure about the noise, could not get a good handle on it. Have a friend ride in the back seat or have someone put it on a lift and run the engine in gear and stand under the rear end and find the noise. Many gas stations will do it for a few bucks.

 

[blackheart102001]

ok thanks my check engine light is on bc of a pcv tube being pinched by the manifold i can fix that

more help please?

 

[Andrizzle]

I'm not sure if I can hear the right sound in that video... It is horrible quality.

But anyways, did you ever remove the strut assembly?

 

[starfox86]

are you talking about the humming sound? if so, I just had my car in the shop for it. I had a bad rear bearing. I have no more rear end noise. It always sounded like a rear tire was humming and out of round when infact it wasnt. I was going crazy hearing the sound allll the time. Is that what your talking about? I know you said you replaced the bearings so idk.



**ya so I just listened to it again with the volume up super load....that is exactly what I was hearing. I went crazy trying to fix this. New tires, down graded to 16" stock wheels that I made firestone balance twice, new rotors. So I brought it to a Cadillac dealer and it was like 187 to change the rear bearing (just pressed a new one in) on one side. Not too bad. But ya, no more humming!

 

[blackheart102001]

yea sorry about the quality of the vid thats the G1 for ya, its def the humming i changed the cv axle, the hub assy, and i still get the humming i might jus change the bearing again