HELP!!! HID conversion installation

[Nozeredd]

97 mark headlights suck. One of mine went out, so I was lookin to purchase a new one.. Friend gave me a set of garage aftermarkets so no box or instructions. I know (lucky me) Not... I have searched for instructions everywhere but im afriad to blow them. Wires scare me. I need kid directions. Bulbs cover says.... super vision HID 9005---8000k Thanks I can send pics of lights

 

[BAD97LSC]

open the hood, take off the headlight access covers above the radiator, look down in front of the ac condensor at the bottom of it you will see two black round plugs on each corner, unplug them, they feed power to your factory ballasts. take the aftermarket ballasts and wire to those plug next to the condensor, they are two wire, black and red, pretty simple what goes where, then figure out a way to put those bulbs into your housings, you will have to make some adapter rings because the aftermarket bulbs will not just pop and twist into the housings, once you figure out that part, simply turn the new ones on!

 

[Nozeredd]

thanks. It just broke down so while she's resting I will fix her eye sight $700 junk yard find (76k miles) gotta expect it