Lincoln Luebbe
Dedicated LVC Member
First off the rotors seem to be great, haven't seated them yet do to other issues that need resolved first...
#1. SS braklines included in the set leak really bad from where they attach to the caliper. After checking everything out it seems they gave me multiple sizes of crush washers which don't provide the needed seal. I am going to try and locate the right size and go from there.
#2. During the testing of the turning radius of the lines, my battery died. When it did my alarm went of and lights flickered and a bunch of crazy stuff. I threw a charger on it for about an hour and tried to start it up so I could disengage the parking brake so we could do the rears and it started for a second and immediately dies. I went out and bought a brand new battery and now I have a constant "check Advancetrac" message. Never had a problem with my advance track, and I'm not convinced there is a problem just need to know about reseting it maybe???
#3. Brand new pards, brand new rotors and both fronts twitch or tick, basically a metallic scrape noise without and brakes being applied. All points lubed well and brakes were bled...
Any help is appreciated...
Before
After
#1. SS braklines included in the set leak really bad from where they attach to the caliper. After checking everything out it seems they gave me multiple sizes of crush washers which don't provide the needed seal. I am going to try and locate the right size and go from there.
#2. During the testing of the turning radius of the lines, my battery died. When it did my alarm went of and lights flickered and a bunch of crazy stuff. I threw a charger on it for about an hour and tried to start it up so I could disengage the parking brake so we could do the rears and it started for a second and immediately dies. I went out and bought a brand new battery and now I have a constant "check Advancetrac" message. Never had a problem with my advance track, and I'm not convinced there is a problem just need to know about reseting it maybe???
#3. Brand new pards, brand new rotors and both fronts twitch or tick, basically a metallic scrape noise without and brakes being applied. All points lubed well and brakes were bled...
Any help is appreciated...
Before
After