Fuel door and moonroof issues

Screw-Rice

Dedicated LVC Member
Joined
May 31, 2005
Messages
1,041
Reaction score
0
Location
Colorado Springs, Co
Moonroof- A few months back my moonroof stopped working and after some looking, found the screws backed out of the motor. Well tightned them up, and it works fine, except it wont vent. I know it is an issue with the timing being off. So how do I correct this?

Fuel Door- My fuel door rattles like a mofo, and it is driving me insane, how do I go about getting it readjusted? I replaced the tension spring (on the fuel door, since I tried bending mine a little tighter and snapped it in half), but it still rattles.
 
Is the fuel door missing the little rubber isolators?


As for the roof, I cant help but I bet Jamie can.
 
Screw, your motor jumped, Drop your motor, turn the gear by hand (vise grips) to perfect close, I think the gear and frame have a paint line some times. while holding the motor, cycle it, you will get a feel for it, when you are at the shut off of the motor reinstall it, If it is off from there, pull motor, turn gear a tad reinstall motor, some time takes a bit, some time boom perfect,

HOpe advise help with the sting lol
 

Members online

No members online now.
Back
Top