mike b lion
New LVC Member
Help ! I how have a 4''inch rubber scoop that sits lower left bottom side grill of a 98 mark.its a 90 degree rubber pipe (home depot)with a rubber 3"inch flex tube about 2foot long and makes 3 90 degee or less turns then dumps in to the intake box.using the same size tube with the bends i stuck it out the sun roof to feel the air flow and man there is a lot coming out.the codes p0102 and p1414 are up and wants to stall and the rpm's drop low when at a stop.what should i do .ANY TRICK !! MBL