Few Pictures

RollinLS

Dedicated LVC Member
Joined
Jul 4, 2005
Messages
4,775
Reaction score
151
Location
TBA
Few pictures I have taken in the last few days.
The BMW M5 lip spoiler. After it was mounted.
"V8" emblem shot.
Few engines shots. After I detailed and put on the "show filter" for the car show. I have a new filter that I only use for car shows.
Rims after some Mothers polish.

The car show canceled due to rain. Reschedule for next saturday now.

LS 292.jpg


LS 293.jpg


LS 290.jpg


LS 297.jpg


LS 295.jpg


LS 296.jpg


LS 298.jpg


LS 299.jpg
 
How much did that brake upgrade set you back, if you don't mind me asking?
 
Thinking about doing a two-tone black on the Autumn Red with a similair design. But using red candy swirl like the orange sample piece. Striped with silver.

100_6050.jpg


100_6065.jpg
 
Hey m4rk I did the same( not exactly same ones) swap cross drilled rotors and ceramic pads for 200 all 4 corners
 
How much did that brake upgrade set you back, if you don't mind me asking?

Powerstop drilled/slotted rotors with ceramic pads. I got them for free. I was sponsored by them. I definitely would use them again. I have been very happy with them. If you were to get them, it would run you around $600 with tax.
 
Yeah there is a local vendor near me who makes them thats why i got them for mad cheap there Magnum brand
 
Few pictures I have taken in the last few days.
The BMW M5 lip spoiler. After it was mounted.
"V8" emblem shot.
Few engines shots. After I detailed and put on the "show filter" for the car show. I have a new filter that I only use for car shows.
Rims after some Mothers polish.

The car show canceled due to rain. Reschedule for next saturday now.
Sweet, your LS is shining hard man. Where's the tire shine at? Tire shine always makes the rims look cleaner(sucks when it slings onto your fender and bumper). Good to see someone else with some hand pin strips on their car. I had my factory pin stripes removed and some new ones done in their place plus 2 stars on the trunk. Not as extravagant as yours though. Looks good as always.
 
im really digging the pin stripping on the engine cover, the under hood looks great.

that orange swirl finish would look crazy good if brought in well with the two tone.

on a side note, all my friends told me not to paint my calipers red with my autumn red LS, they siad that it wouldn't look right, so i mixed a little black in with it to darken it up just a tad (not much really at all) and better blend with the cars paint color, and every picture of yours looks great so i dont really know what they where thinking!
 
Lookin good, dude. :cool:

Is that Sprayway glass cleaner? I use that stuff all the time.
 
Lookin good, dude. :cool:

Is that Sprayway glass cleaner? I use that stuff all the time.

Thank you.:)

Not sure what Jason was using. He had to prep the area to re-stripe the passengerside.

Checkout the links. Some sick stuff.
 
im really digging the pin stripping on the engine cover, the under hood looks great.

that orange swirl finish would look crazy good if brought in well with the two tone.

on a side note, all my friends told me not to paint my calipers red with my autumn red LS, they siad that it wouldn't look right, so i mixed a little black in with it to darken it up just a tad (not much really at all) and better blend with the cars paint color, and every picture of yours looks great so i dont really know what they where thinking!

Thank you for the compliment.

You should repaint your calipers red. To your friends.:p
 
Powerstop drilled/slotted rotors with ceramic pads. I got them for free. I was sponsored by them. I definitely would use them again. I have been very happy with them. If you were to get them, it would run you around $600 with tax.

Ouch, guess i'll be hanging onto the stock stuff for now.
 
Just get teh rotorpros package. You'll get d/s rotors, pads, AND Stoptech Stainless lines for 350ish. gen 2's only get front lines though.
 

Members online

No members online now.
Back
Top