Eibach PRO-KIT Settled uneven

[mookie86]

I have an 04 LS w 89k on it. I installed the springs about 3 weeks ago and i gave it plenty of time to settle.

I am experiencing uneven height from left to right on the front only.

some surfaces it looks even but on most it sits uneven and I eyefahq my car so this is becoming a problem lol.

The tophats and insulators are sat properly as well.

Am I alone in this or are these springs just that sensitive to ground change?

 

[FASTLLS]

A picture may help..

 

[mookie86]

Ill get some asap im at work currently

i was on eibachs site and it says to index the springs or clock them to manufactures spec.

as long as the top isolators groove is at the end of the coil it should be indexed right unless i have to twist the spring the same as the passenger side.


im use to hondas and have always went full coilover, this is making me dislike springs

 

[Villalta]

How uneven are we talking here?

 

[mookie86]

quarter inch or so which to me is a huge difference. None of the arms are bent or broken and there isnt play in the ball joints or bushings that i can tell.

 

[Andrizzle]

Dude it is the surface. The slighest gradient will torque the car to sit 'flat' on the wheels. This is more noitceable once you're lowered. What you think is flat ground is usually not.

Try to find a freshly poured Parking lot in concrete and try to park on a single slab and check it out. But still I really doubt it is the springs.

 

[mookie86]

yeah thats what im thinking and i park the same everyday

This is my first big car ive owned and i like perfect stance

i wish there was a full coilover set up for these cars or intrax and sprints were still available

 

[mookie86]

ill be getting pictures up asap along with a few pics of previous cars

 

[LS4me]

Get a tape measure and measure the height at the same place on both sides. That's way more accurate than your Mark1, Mod1 eyeball.