Eatc codes ????

[Lownslowlsc]

did the self-test and came up with a 135 and 155..I've determained through searching that the 155 is the blower motor module dudad under the glove box.

Whats the 135?

Btw, my blend door is busted..Though doesnt indicate that through the test?

 

[papa bear]

02 sensor heater circuit malfunction bank 1 /sensor 1 #135 code, this is right out of chiltons repair

 

[Lownslowlsc]

wtf....

Anyone care to explain a fix?

 

[papa bear]

what year ,this is for a eec-iv lincoln computer car and your o2 sensor is not reading might be a bad o2 sensor or the wiring

 

[Lownslowlsc]

How would the o2 sensor code come through the self-test for the climate control?

 

[papa bear]

what year is your car

 

[Lownslowlsc]

97 lsc

 

[papa bear]

that helps alot, and both codes are o2 related for a obd ll eec-v lincoln mark viii.Code #155 is 02 sensor heater circuit malfunction bank 2 sensor 1

 

[driller]

The EATC codes are NOT OBD-II codes.

Someone with a Gen2 manual will have the codes. The Gen1 codes are 01 through 05.

 

[driller]

..I've determained through searching that the 155 is the blower motor module dudad under the glove box.

Check out this LINK.

 

[Lownslowlsc]

Check out this LINK.

hmmmm...idk

Everything seems to operate just fine with the blower i just get the code..I thought it was the module cause they tend to get wet from water coming in through the duct that is prone to have a leaky gasket....I inspected said gasket and it appears to be sealed completly

 

[papa bear]

The EATC codes are NOT OBD-II codes.

Someone with a Gen2 manual will have the codes. The Gen1 codes are 01 through 05.

Sorry,disregard my previous post they are worth less and how did you pull the eatc codes

 

[Lownslowlsc]

check this out

http://www.jonko.com/auto_repair_forums/index.php?showtopic=12424