Hi All, I have saw/read threads were many have drilled a new bottom mounting above the original so the strut will still lower. I followed instructions and measured the space I had between the strut and LCA. I had about 15 millimetres and to be safe drilled at 8 millimetres. You see from the photos even just that small difference would not all the bolt hole to line up before the strut bottomed out on the LCA. is there something I missed?
I would think drilling it any closer to the original hole would not make much of a difference.
I would think drilling it any closer to the original hole would not make much of a difference.
Last edited: