Dreaded 3 & 2 Blink PLUS

[Husker Z]

No heated seat. Okay, so the airbag light is doing the 3 & 2 blinking, but also, the seat heater stopped working. I lifted the seat out and checked the connections and everything appeared fine. My question is, is there a connection on the actual seat itself, or is everything connected on the floor? I would think the two problems are related, but maybe not. Any help/ideas?

 

[Quik LS]

it is usuall the yellow connector under the seat - on the floor.

 

[Husker Z]

it is usuall the yellow connector under the seat - on the floor.

Yeah, that's what i checked and it was fine, at least there weren't any wires cut or removed or anything. I would think that would be the culprit, but it sure didn't appear that way.

 

[HyeLifeLS]

The airbag light is probably your clockspring. No idea about the heated seats, I don't have em.

 

[Husker Z]

The airbag light is probably your clockspring. No idea about the heated seats, I don't have em.

Sounded like the airbag light was a 50/50 shot that it was either the connector under the seat or the clockspring. But, I thought since the heated seat quit at the same time that it was more likely the connector under the seat, but everything looked okay.