Door trim panel R&R

dosMarkos8to's

Active LVC Member
Joined
Sep 28, 2009
Messages
98
Reaction score
1
Location
Central Texas
I need to replace the outside passenger side mirror on my '98 Mark. Have tried wording search to turn up help on how to r&r the door trim panel with no luck....so I am frustrated and have run out of word combinations..need help! Can anybody guide me to any posts, with pics would be great, on how to get the panel off?
Thanks,
Dos
 
The panel slides upwards, take the door handle trim off first then slide panel upwards from the edge towards the hinge. Be careful of the window switch wires...... I have to work on mine in the morning ill post pics
 
03892e3abd8e5420f71be3b04456116d.jpg


First pull off the door handle trim
cb5e8ac37ee9e0da9450a647ee7ccf50.jpg


Then the window switch panel. Pry from the left side. Then Unscrew and pry off switches.

857b91bc1eeeb1842f35114a6439704b.jpg


Next, window switch. Again pry from left and unscrew and pry off

2783b986fc683f544f51b74fcd85e64d.jpg

8dad111be65eeacf0e419d9e321094b4.jpg


Next the light on the bottom left will need to be popped off and unscrewed.

2aab594040424e6f0b4e98d615ffd411.jpg


After those are done just push up from bottom of panel to unseat the window molding. Be carefull of the mirror panel it will hang you up.

71866c566df7ec42b6869f645a41ffa2.jpg


Then just finish un doing harnesses and you good to go.

Passenger side much simpler due to lack of switches.

Good luck
 

Members online

No members online now.
Back
Top