Dang Door handle broke

[Jeffintampa]

Hey all my door handle finally broke, been babying it for a year or so.


Anyone got a black 96 gen 1 passenger door handle?

 

[98CobraStarLSC]

uhhhh.. mine broke about a month ago too! so ghetto looking with a big whole in the door there. I opted to remove the assymbly and leave the rods so i could pull them to open the door rather than going through the passenger side..

Its difficult to find a torr red one but ebay has some black ones i know of.. all mark viii ones will work 93-98..

 

[kustomizingkid]

I have two green ones.

 

[Speed Demon]

My friend 97 has one still. I'll post his email on the for sale 97 list I have.

 

[RedCellSix]

Jeff, another obvious choice is to IM Jamie who might have a black one requiring no painting.

 

[BAD97LSC]

i dont have any door handles, hell i dont have much of anything anymore. someone come down with a uhaul or semi trailer and take the rest too.

 

[Lownslowlsc]

Mine is t.red aswell and i picked up a can of duplicolor at pepboys and its an exact match. Sand, 1 layer of primer, 2 layers of paint and 2 clears. Looks great. Have done it on my drivers side when i got it cuase the prev owner left it at primer. replaced and painted the pass side in the fall cause it broke.

 

[chicken]

i dont have any door handles, hell i dont have much of anything anymore. someone come down with a uhaul or semi trailer and take the rest too.

...............hmmmmm.................:shifty:

 

[CobraStar_LS8]

It would be nice if someone can Fabricate a pair of used Mark VIII doors to have the door handles on the side Vertical next to the Quarter Panels...It would make the Mk8s look Sick and Awesome as FUCC!!!!

 

[kustomizingkid]

The amount of work to do that would be ridiculous....

 

[mrzeee]

I do stock both the right and left. left is 40.73 and the right is 60.47 paint would cost an additional 30-50 depending on the color and the mood of the body shop manager when I ask.

Max

 

[Staffamerica74]

i dont have any door handles, hell i dont have much of anything anymore. someone come down with a uhaul or semi trailer and take the rest too.

That isn't too good for the community....

 

[Frogman]

It would be nice if someone can Fabricate a pair of used Mark VIII doors to have the door handles on the side Vertical next to the Quarter Panels...It would make the Mk8s look Sick and Awesome as FUCC!!!!

You're a t00l.

 

[Jeffintampa]

come on someone has a black one passenger in the garage

 

[kustomizingkid]

I told you I have a handle for ya... are you just scared to paint it?

 

[Jeffintampa]

no to broke to spend 40.00 on it lol gotta try lol

 

[kustomizingkid]

$30!

 

[BAD97LSC]

$40 for a handle is too much?????????? you wouldnt want one from me then!!!!!!!!!!!!!!!!!!!!!!!!!
i hate to say it jeff, maybe you are figuring it out already, but if you are broke, you bought the wrong car dude. a mark VIII will drive you to suicide if you cant afford to fix it!

 

[cadillackman]

IM Warlockpain, he's parting a black 97.

 

[Jeffintampa]

Thanks warlock 30.00 shipped and its black woohooo wishes and prayers come true

 

[BAD97LSC]

see that, there are some nice people left out there, i know i'm not one of them!!!!!

 

[AbrahamLincoln]

when you get a new handle? Do you swap over the lock mechanism + keypad to the new handle? Or does the handle come as one piece and you get new key with it? My drivers sides a little funky.

 

[kustomizingkid]

when you get a new handle? Do you swap over the lock mechanism + keypad to the new handle? Or does the handle come as one piece and you get new key with it? My drivers sides a little funky.

Do you want one key to be competley different from all the rest on your car?

 

[BAD97LSC]

a new handle is just that, a new handle, it doesnt have the keypad or the lock cylinder.

 

[Kevin]

Keypad attaches with ONE nut. Simple.

Lock cylinder is held on by ONE clip that pulls out. Simple.

Re-use the old stuff.