cruse lights?

[Jeffintampa]

Hey does anyone know how to re wire the lights so the first click on the light switch runs just the tail lights and front amber lamps?

 

[richduty455]

isn't that what it already runs????

 

[Jeffintampa]

No my first click no mater when is the low beam headlights

 

[unity]

At first I thought you had a daytime running relay installed, but I though that was high beams? I forget.

What year?

 

[BAD97LSC]

jeff you have your auto headlamp wheel turned to the wrong position, turn it off and your first click will be tails and parking lights only!

 

[Jeffintampa]

Jamie, I have my headlighs dial on manual I dont use the auto tried seveal different ways the am no luck headlights turn on

 

[Frat-man-du]

Maybe the daylight sensor on the dash is unplugged or faulty - is this even related to the headlight? I know it is for the dash lights. Anyway the panel just pops off - use fingers never a screwdriver that may damage the panel. The sensor is the little dime sized clear plastic eye on the passenger side - there is a standard connector underneath - easy to forget if the dash was ever apart.

 

[Jeffintampa]

no dash has always been there mid day dial clicked up into manual postion I turn my headlights one click and poof headlights on 96lsc

 

[BAD97LSC]

i'm willing to bet the photocell is no good on the pass side of the dash, that will cause headlights to come on all the time even in sunlight.

 

[unity]

Ya... but not if set to manual and just going to parking, right?

 

[Jeffintampa]

right first click on turning on the light, got the dial to manual, turn and boom headlights

 

[Markviiiedrea]

Your blinker fluid is to low!

Couldn’t tell Yhea, what Jamie says is right, I would have to go in to the system with a schematic, it sound like someone was in there before you. Has it always done this since you got the car?

 

[Jeffintampa]

car use to boot up as check lights but think the previous owner did the headlights thing cause mine are not that bad (dark) I followed the directions on the hid replacement and went into the glove box and cut that wire that fools the system brown and yellow I think.