cable linked system
- Thread starter 601hotboy
- Start date
NYC LS8
Dedicated LVC Member
Why?
Throttle by wire is annoying as all hell.
Throttle by wire is annoying as all hell.
Quik LS
Dedicated LVC Member
not easily.
The newer throttle-by-wire is available on the Gen2s - but controlled by the newer PCM. This PCM is part of the upgraded CAN network - meaning that most of the systems (I believe there are 7 of them - FEM, REM, Gauge Cluster, TC/ATC, DDM, ...etc) were upgrade to CAN interfaces. The Gen2 PCM is also expecting VVT, ...etc so there may be different engine sensors, ...etc that I haven't identified.
The newer throttle-by-wire is available on the Gen2s - but controlled by the newer PCM. This PCM is part of the upgraded CAN network - meaning that most of the systems (I believe there are 7 of them - FEM, REM, Gauge Cluster, TC/ATC, DDM, ...etc) were upgrade to CAN interfaces. The Gen2 PCM is also expecting VVT, ...etc so there may be different engine sensors, ...etc that I haven't identified.
chocolat1701
Dedicated LVC Member
in that case what quickls is saying,
NO unless you want to buy a 03+
NO unless you want to buy a 03+