building a new transmisson & need some help

C

Cbecker1994Vlll

Well-Known LVC Member
Joined
Dec 30, 2005
Messages
372
Reaction score
0
Location
up in da haters
i am getting ready to build a new transmison for my 94 mark.
so basically i am wondering

who makes good torque convertors for an AODE and what size stall i should go with, i am trying tokeep drivabilty, this is for my daily driver. I got a stall on my mark right now with a foot brake stall of about 2800 and i would like more but once again drivability is a big factor i don't want it running like crap going down interstate

also who makes the best shift kit for our cars also.
and what else should i look to do wheni am building the new tranny.

all opinions welcomed.
thank you
 
I think the general consensus is that Baumann makes the best shift kits. As far as the stall, I think 3200-3500 are pretty popular choices. Let those who actually have these things chime in though.
 
Cbecker1994Vlll said:
anyone want to chime in i am ordering stuff tommorow so i need some input today.
thanks for your help guys
Click to expand...

to maintain highway driveability,be sure to get a converter with lockup,that way once your cruising it wont be any different than a stock converter,and will only have the extra revs when ripping on it.

also make sure to upgrade your intermediate one way clutch to the mechanical diode version.dont even bother re doing these trans unless you upgrade that part.

other than that,i am of little use,others will have to help with the rest.
 
Baumann shift kit and PI Stallion 3500 triple-disc stall converter.

You're building the tranny?
 
Precision Industries 3200 stall KICKS A$$. 600 and worth it. It's a must have. Just my 2 cents.

Greg
 
You must log in or register to reply here.

Members online

No members online now.
Total: 55 (members: 0, guests: 55)
Back
Top