Avic D3 install questions

[k9t8m]

I am trying to get my avic d3 installed this weekend, and ran into a
problem. The speed wire.... Where exactly do i splice into the spedo
system? Also the reverse wire, do i just tap into one of the back up light
wires? Thanks

 

[MsM8tress]

Looks alot like what Mike had in his orange Mark, not for sure, but this might help.

http://www.tundrasolutions.com/forums/1gen-sequoia/94681-sequoia-avic-d3-install-pics-speed/

if not check this google search out and see if any fit:
http://www.google.com/search?hl=en&ie=ISO-8859-1&q=avic++D3+install

I drewl over your hood.....(I said over it, not on it!)

MsM8

 

[k9t8m]

I appreciate the help, but I already have everything pre wired, but i just need to know specifically on the mark where those 2 wires go.

 

[MsM8tress]

I think Joey has something similiar, shot in the dark but ask him to ask his installer.Oh yeah, also have you tried a search in LVC on the name, it pulled up a lot of threads, anothe shot in the dark maybe, but might find something.

MsM8

 

[GMAN]

You need the VSS wire, and you can tap into it from behind the speedometer. I didn't use the reverse sensor. There was no need for that one.

**CLICKY**