Anyone? Neon won't go on unless I remove

Megaboink

Active LVC Member
Joined
May 4, 2005
Messages
108
Reaction score
2
Location
Garden state
Anyone know why my 98 Mark VIII neon backlight won't go on,
Unless I disconnect it from the power clip, then plug back in.
I put so electric grease , electro something , still same problem.
Even if it goes on after after removing power clip, and pluging it againg
It will go off on its own after a while. Sometimes it lt longer on.
I checked the ground, clean all the metal connection for proper
Contact, but still the same.

Driving me nuts!
 
Anyone know why my 98 Mark VIII neon backlight won't go on,
Unless I disconnect it from the power clip, then plug back in.
I put so electric grease , electro something , still same problem.
Even if it goes on after after removing power clip, and pluging it againg
It will go off on its own after a while. Sometimes it lt longer on.
I checked the ground, clean all the metal connection for proper
Contact, but still the same.

Driving me nuts!

Your ballast is more than likely seen better days. Time for a new one!
 

Members online

No members online now.
Back
Top