Found one air line loose on the top of the compressor Dryer and ordered a part from the local ford dealership F1LY-5B321-A and I just want to make sure this is the right brass grommet I need for this repair, the brass grommet looks the same but the o-rings look different and I look at the instructions on how to install it and it tells me to look at a repair manual. The green hose was out of the compressor and the grommet looked messed up, I just want to put it back together in the right order cause I know they will grab the hose and not let go sometimes, just like the tranny lines. Anyone have some pics on the right order of installation before I have to go buy another kit for $20 bucks for one brass fitting and some o-rings..........lol. I also noticed on a post earlier about air ride troubleshooting Elessee had mentioned a way of getting troubleshooting codes from the car and that it was posted on one of his earlier posts, I looked but I can't find that post, any help would be appreciated. Thanks as always. Gramps