93-96 Back window molding

[warrioralumni08]

Is there anyway to fix this? As mine is horrible looking, and since I was told, it was attached to the window, I would have to get a new/used one, if I wanted to replace it. No telling how much that would cost. :shifty:

 

[keatonsdad]

The info is here if you search I think it was put up by NoLimit. If I had more time I'd find it for you but I do know it's here somewhere.

 

[NoLimit95]

All I done when I had the black 94 was having the rear window removed from the black 93 without ripples and had the back glass installed in the 94 for $119 in my driveway by Glass Masters. The 95 already has a new back window in it. The back glass is still available from Tasca for $310

[url]http://www.tascaparts.com/parts/1996/LINCOLN/MARK%20VIII/?siteid=213668&vehicleid=1188547§ion=BODY%20HARDWARE&group=BACK%20GLASS[/URL]

Or you can check this out.

[url]http://www.lincolnvscadillac.com/showthread.php?t=72137[/URL]

 

[keatonsdad]

There you go!!

 

[NoLimit95]

Keep in mind, back glasses can be found without ripples if the car was garaged for the most part and a new back glass can probably be bought cheaper from somewhere else. I listed Tasca because it is an original Ford glass. I have no idea how long a double sided 3M tape would hold up. I never used it before but maybe someone on here has some before and after pics and can come on here and post their experience with that method. (warrior), the way you speak of yours, it might be too bad for that type of fix. Might be better off finding another back glass. The $119 I paid was for TWO removals and one install if that helps you any. They will do it right at your door.

I did have to help him a little because of the glass size but I didn't mind. I just wanted it installed right and he couldn't handle the glass with it's size and his small body frame he had but he did lay down a nice hot malted bead of fresh rubber and double beaded at the bottom and then I helped him set it in and press it down into place. Now that car is burned and gone.

 

[davidm]

I applied a moulding kit about 3 years ago after a paint job. Moulding still looks good, paint job turned to crap.