10.4 inch monitor molded into dash!!!!!!

HyeLifeLS said:
Hey man, now you are like the Mad Mike from Pimp My Ride! That TV is sick!! Very nice job, but hey man get that damn glove box door adjusted like I told you the last time.

We should through another Cali meet to show everybody that Cali iz active.
Click to expand...


yo Artur i tried to that glove box trick, but i forgot how to do it.

you might have to show me at our next meet!!!
 
You gotta adjust the lock, the one on the dash board, not the one on the door. There are couple of bolts you need to loosen up and move the lock a little bit up and then tighten em up. That works really well. Try.
 
yo

that alpine vehicle hub pro vpa-b222.. does that owrk with ANY TV?
 
HyeLifeLS said:
You gotta adjust the lock, the one on the dash board, not the one on the door. There are couple of bolts you need to loosen up and move the lock a little bit up and then tighten em up. That works really well. Try.
Click to expand...
Ok got cha...i will give it a shot on sat. I wil let you know, thanks Artur!!
 
yo

i was told that the alpine only works with alphine.. whats good with that?
 
BanginLS said:
i was told that the alpine only works with alphine.. whats good with that?
Click to expand...


Well the hub is connected to an XOvision flip down monitor so i guess it works with other monitors and its hooked up to a Bravo dvd player. It works with other brands but the only thing that sucks is the multiple remotes.
 
u need to use a diff. remote for each thing? the DVD player.. the radio.. the HUB.. the flip down? u use like 4 controllers?
 
BanginLS said:
u need to use a diff. remote for each thing? the DVD player.. the radio.. the HUB.. the flip down? u use like 4 controllers?
Click to expand...

The dvd/cd player has a remote i use, the hub which is the radio has that remote u see on the second pic by the shifter(it works like the bmw knob like thing they have in the center console to control the radio) the monitor has a remote but i dont need to use it bcus it comes on automatically when cars tuned on.

If i get an apline dvd player i can get rid of the bravo remote and control it form the hub remote.

Hope that makes sense.....i am kinda tired and out of it right now.:p
 
i get u.. right now i got the kenwood 6.5 inch so im not gonna go crazy for 3.5 inches.. i think ima finish my current projects and maybe get something done with this..

nice work though
 
BanginLS said:
i get u.. right now i got the kenwood 6.5 inch so im not gonna go crazy for 3.5 inches.. i think ima finish my current projects and maybe get something done with this..

nice work though
Click to expand...

yeah i had a 7 inch b4 but it burned out so I had a chance to upgrade.
 
i want a 10 inch but i dont know where to put it..e veryone has it off the roof..i was thinking of putting one in the trunk with a camera so when ppl walk by they see themselves like at the mall... that would be crazy.. any ideas? i rather have the 10 inside the car but it doesnt have much room
 
BanginLS said:
i want a 10 inch but i dont know where to put it..e veryone has it off the roof..i was thinking of putting one in the trunk with a camera so when ppl walk by they see themselves like at the mall... that would be crazy.. any ideas? i rather have the 10 inside the car but it doesnt have much room
Click to expand...

i have started my new enclosure with the same idea, already built new box and i am starting on the trim pieces, i won a camera on ebay, but i dont know how good the quality is yet. i will post some pics as soon as i get my camera back. i know it will look alot better than what i have right now, should be done in a couple weeks, that is my goal, because the shows will be starting up again. if anyone knows of a good quality camera let me know, i may buy a different one if this one doesnt work out.
 
post pics when its done.. i was gonna put a 15 inch tv on the top deck lid before but now i really dont know.. any ideas?
 
i thought of two different ways, 1st was like what you said, a flip down from the trunk lid, but then i was trying to figure out where to put the camera and a good place would need to be eye level when the trunk is open so i decided to put a swivel type camera on the lid instead and the tv right in front on the bottom trim piece.
 
u misunderstood me.. i dont want a picture camera..

i was going to fiber glass a TV into the trunk so when it was raised u can see it.. then hide a reverse camera prolly on the bumper and have that TV have two inputs.. my tv and the R. camera.. when u walk by u show up on the TV..
 
BanginLS said:
u misunderstood me.. i dont want a picture camera..

i was going to fiber glass a TV into the trunk so when it was raised u can see it.. then hide a reverse camera prolly on the bumper and have that TV have two inputs.. my tv and the R. camera.. when u walk by u show up on the TV..
Click to expand...

u lost me on the first line,:shifty: but i probably wont be using fiberglass, for what i want in fiberglass, i was quoted 3000 and an extra five hundred if i want it ported in the back dash. i can do wood, just not fiberglass. the camera i am talking about is a backup camera, its just there is one that has a mounting swivel to it. i plan on putting it on the underside of the lid, so when people walk up to look, (and everyone does) the camera will be right in their face. the tv will be right in front on bottom so they will just see their face in aww. ok maybe a little exaggeration:) i have a friend that works at daddyos car audio, he said he is going to let me use their badass table saw, so im hoping its going to look good.
 
got my camera in the mail today, i must say, i cant complain for 11.00. it is about the same quality as the ones that sell for 39.99 to 59.99. and it actually almost matches the color of my car so it will fit right in. now is just to find the location i positively want it in. progress on the new enclosure. have all my cardboard cutouts ready and the box is finished, probably will buy material this weekend and set up a day to use my friends shop.
 
Since I see alot of new young heads... I figured I would bump this thread for them to get ideas of something a lil different and maybe spark some new projects. Good luck!
 
You must log in or register to reply here.

Staff online

Members online

Total: 242 (members: 1, guests: 241)
Back
Top