Search results for query: *

i have a limited slip from a mustang that i rebuilt and i can't make up my mind on what gears i want to put in with it. it has 3.27's in it now and a dogleg. it turns(by the stock tach/speedo) about 1800-1900 at 70. i can't make up my mind about 3.73's or 4.10's i drive it to work everyday and i...

anyone from the dallas, Tx area?me and another guy are talking about getting together at a hooters, and was thinking that if anyone one here is from around here, yall could join.

both were 5spd cars. the 300zx was from a stop the first time and he got me by 2cars, then i bumped the timing from 10 degrees to 13 and i beat him by 1/2 car. then i raced the VW with a 5spd V6 and beat him by 1 1/2 cars. that sure was nice. :L

if 2000 mustang gt limited slip and 3.73's will work in my car? they are both 8.8's, just not sure if they have the same splines

got my new steering rack and outer tie rods on yesterday. car is still detonating/spitting/sputtering. i thought i may have had water in the gas, cuz i filled it up and as soon as i pulled out of the station, it started. i put STP fuel treatment. still doing it. gonna try a new ICM. if that...

at an 1/8 mile track. didn't do like i had hoped. i ran a best 10.56@67mph. all i can say is that it will get better. i am going to get my first mod tomorrow. :L

i need a streering rack for my 87 M7, i was told that a mustang rack was the same, it just had longer inner tie rods. do you guys know if that will work? :L

i had to change my t-stat saturday. i worked for 4 hours on it and couldn't get the short bolt to start, the dang water pump is in the way. i thought it started on a couple of threads, so i got my socket and started to wrench away. it got about half way and stoped. i stripped the threads on the...

what a kit costs to change over to spring/shock combo? i really want to get rid of this crappy air bags. i was thinking just get the springs/shocks/front lower control arms from a 87-88 thunderbird. what else would i need? let me know if i forget something :L :feedback

my suspension light stays on. i found the problem. the 4 lines that go into the dryer don't seem to want to stay in. they pull out just alittle, enough to let the air blow by. do i need replace the lines? or what do i need to do. i don't want to burn up the compressor :L