Search results for query: *

1986 Lincoln Mark VII Bill Blass edition 5.0 engine Female in the House :steering Request: Looking for recommendation to resolve head panel upholstery. Background: See first picture of the existing head panel removed from my car. The previous owner had torn the...

1986 Lincoln Mark VII Bill Blass edition 5.0 engine Does anyone have a technique for cleaning and polishing the chrome hubcaps on the 1986 Mark VII? See my picture below. Is there a quick way to bring them back to shining brilliance without spending an entire day doing each spoke?

Must replace 1986 Lincoln Mark VII engine - Bill Blass edition Got quotes from several shops. All say Ford's new motors will not work on Mark VII. I've also been told Ford does not rebuild Lincoln motors. Is that true? I've Googled and found only companies I've never heard of offering...

Lincoln Mark VII -- Bill Blass 5.0 L The advice I'm getting from various sources is this: Pull the life support plug on your Lincoln. The oil spout is smoking, so, they say that means the engine is shot. Something about a blow by. I still have to have the rear transmisstion...

1986 Mark VII Bill Blass 5.0 Liter We removed the plenum and the valve covers. Cleaned and then reinstalled. Hanging on a hose from the plenum was the pcv. I replaced the pcv, but cannot determine where on the engine where the valve plugs in. According to my Haynes...

Bare with me, I'm new to Lincolns. I've always been a Chevy owner Can anyone answer a question about a 1968 Continental? I had to make a high speed run to the Hot Rod shop (only place you can buy the steal belted hoses.) When I drove into the parking lot, there was behemouth coup version...

1986 Lincoln Mark VII Engine: 5.0 L Woman in the House Question: Has anyone replaced the rear bushing and seal on the transmission? How labor intensive is it, and what is the procedure. Problem: My car is shimming and shivering when I accellerate...

1986 Lincoln Mark VII engine: 5.0 L Woman in the house. While on my way to work this morning, I accellorated to get on the freeway while trying not to become road kill. :steering Well my normally, speed racer Bill Blast, and yes that is how I spell it, because...

Auto: 1986 Mark VII -- Bill Blast edition 5.0 motor Problem: Frequent brake fluid loss. Go through about two-three pints of fluid per week. I went to auto parts store to get replacement. Went through three exchanges because each one they gave me, did not match what I...

Auto: 1986 Lincoln Mark VII -- Bill Blast edition Problem: Installed new stereo that is inset in console hole. Ugly. I just had a Pioneer stereo installed in my Lincoln. It is high-end stereo with all the whistles and bells, including MP3 capability, satellite radio, and...

What: parting out pristine LSC :wrench Auto: Lincoln Mark VII LSC 1989 Where: Pick-N-Pull in Rancho Cordova, California (Sacramento County) This LSC was loved and none of use could ascertain why it's at Pick-N-Pull, but it was a red letter day for many of us. This...

Looking for advice and or insight on what to expect and or the dos and don'ts for dash removal and replacement of heater core, evaporator, and blower motor. Service shops want $900 for parts and labor. No can do, so, I have to do it myself. Car: 1986 Lincoln Mark VII -- Bill Blast...

Admittedly, I'm new to the Lincoln Mark VII ownership. Prior to that I had always been a Chevy owner, with my recent car a 1977 Impala. So far, everything on the Lincoln that requires replacing is a major act that costs a small fortune. I'm so frustrated I want to drive the beast off a...