Search results

Change your cam and also crank sensor, use only the ford sensors.the leaking plug tubes pull the plugs wipe em out till clean with a rag and solvent and wipe some oil resistant silicone around the rubber rings and let it dry. I chased the coil pack circus and found it was the crank sensor...

I sold my 96 some years back but look in occasionally . I converted mine to springs and would have converted it back had I kept it. Get the replacement air struts and look into an aftermarket pump and tank .there is so much air suspension work being done a really trick system shouldn't be too...

Sorry I rarely come on sight anymore. You have several issues that need to be checked out. But the intake runners will get gunked up if these cars are driven by little old ladies.and most are. The seafoam will in many cases will free them up. Hopefully you have gotten all this behind you. These...

You might try running a can of sea foam through the pcv valve letting it sit a half an hour and then get it on the highway and run the crap out of it. I used to have a 96 with the same issues and that cleared it up.those butterflies get gunked up because nobody gets out and punches the gas...

Glad your coming out the other end. I haven't been around for a few years either, may get the bug again though

Haven been on the forum in a while and felt like I should say, get a Ford sensor, don't buy any crap from China or auto zone or any other place get a Ford sensor, been there done that. It's a tight area but it isn't the worst either.just be glad Lincoln left an abundance of extra room in the...

just stopped back in to see what was going on here I've been gone a while . i agree 4:10 gears j mod tune search l.o.d site for removing the baffle from the intake air box in the fender, and get an adjustable fuel pressure regulator and get about 40 lbs dialed in, some will say stuff about the...

haven't been looking in lately so thought. I'd check in. i sold the 96 to a friend a while back and am pleased to say he is really taking good care of her. i have finished my 79 Corvette and enjoy it alot. glad to see geno, Jamie laser gman and all you guys still here. at some time ill get...

i sold my 96 LSC a few weeks ago i was in a way the original owner. i didn't get sick ofs it i just didn't have garage space so i sold her to a friend of mine. i finally got my 79 L-82 Corvette on the road and I'm having a blast I'm doing all the stuff to it that i did to my 78 pace car when it...

make sure to run premium fuel and clean your i.a.c that. may. be your rough idle

interior is tan.the drivers side bolster is rough but the rest is near flawless.

i have a hard time posting pictures with my droid email me at hotrodlincoln577@gmail.com and ill send some to you.

ok $1499.00 for the headlights

96 lsc Pearl white chrome 10 spokes needs 1 tire and outer part of drivers door handle. cold a/c new radiator very clean. viper gts louvers in hood msd coils and wires drilled rotors custom exhaust with flowmasters. runs very well. 220k well cared for miles $1500.00 offer me less and ill raise...

does the Gen 1 have the blend door? i was under the impression only the gen2 had that issue. it may be the 96 is different,just like obd11.

okay,my air conditioning is blowing hot air on my 96. the high pressure line is cold and sweating the other is warm the compressor cycles like normal. it worked perfect. and i didn't drive it for a couple months and now just hot air. does a 96 have a blend door? i thought they didn't. the fan...

you'd like my hood than. it has louvers in it and doesn't change the profile of the hood. somewhere on here i posted a picture. yours looks interesting good luck.

i agree I'd have to see it on a car, just not my car!!

I'm 5foot 16 240 and fit fine lol

the mark VIII is listed as one of the cars to build! it lists super coupe performance. as the vendor of choice which sucks! i wish they would have done more homework. but we have arrived