Search results for query: *

For the key. download forscan and buy an adapter for the laptop. The dealer could not program the key for me and told me it was a security module issue. I downloaded forscan and did it myself, no issues. The dealer does not know how to work on these cars anymore. Check and clean all the...

The transmission is ok as long as the fluid has been replaced. In 2000 it was not synthetic. After 2003 I think mercon 5 became synthetic. Check the condition of the fluid and a fluid change is probably recommended. When I get a new vehicle (used) I change all the fluids out. Do not forget...

Probably the clockspring and just an unlucky break that it stopped working after the pcm replacement. Do all the steering wheel buttons work?

Check the relay. This happened on my gen1 and it was the relay. It is cheap, when I bought mine it was $7. Standard ford part so the dealer should have it. Relay 14, I think, pcm power.

Probably to set the base idle. You will have to get the shop manual or google it and see. Usually you would clamp the hose for the idle valve closed and then adjust to the proper rpms. A guess would be somewhere around 600 rpms. Probably similar to this...

Check my post in the Jag brakes thread. If you still are interested, it is a 10 plus year old post.

So as an alternate to the Jaguar brakes I also have an mn12 thunderbird. I bring this up because a brake upgrade on the mn12 was to use the LS brakes which bolt up, no issues. The mn12 has 10.8" single piston front brakes, so the 12" from the LS was a big upgrade. I have upgraded the tbird to...

Car, engine, year, etc?

Again what exavtly is the PATS light doing?

Used Jag wheels can be had.

Is this the shifter you bought? (5-00591) OE BMW E46 M3 Short Shift Kit (25117527259) I would like to try this and what knob did you use?

235 50 17 is the stock size.

With the new rear surround and proper centre caps.

Ok, has any body changed one? How do you get to the top bolt? Any tricks? It seems almost impossible to get to.

I've been under the car. There are two ends to the linkage, one by the shifter and one on top of the trans. Which end are we talking about. The one on top of the trans is not that easy to see as the trans is in the way.

Can you give more details on the slave and shifter? Where are the clips you push out with the screwdriver?

More information would be necessary to give you a correct answer. The diameter would be a big help. Width and number of spokes would really get a good chance of getting a correct answer.

So it seems my slave cylinder/release bearing decided to fail yesterday. I ordered a clutch kit and master cylinder but can't seem to find the pilot bearing. Does the car have one?

Changed the oil in the transmission. Getrag 221. For reference the drain plug and fill plug are 17mm, drain on the bottom and fill on the passenger side. Anyone who has this transmission should check the fluid annually as mine was down about 1 litre and it takes 1.1! I couldn't believe it...