Search results for query: *

  1. 1wykdmk8

    Look what @ 20 minutes can get ya (Gen I)

    Like the caption says, I spent @ 20 minutes each side, and then gave them 2 VERY heavy coats of wax. Hope they will stay this way for a while.....tired of not seeing at night, and I even have 85W fog/driving lights behind the grille. I used (basically because I have it handy) some rubbing...
  2. 1wykdmk8

    What do you get.....

    ......when you add 40,000+ miles 3 years and over 120MPH over a bumpy a$$ed road??? :shifty:
  3. 1wykdmk8

    Does anyone.....

    .....have a coilover conversion kit that has yet to be installed?? If so, please either inbox me here or email me before installation. :D
  4. 1wykdmk8

    Barney is BaCk!!!!

    For those of you that know......know, but for those of you that don't......Barney is BaCk!!!!! A GREAT BIG THANX goes out to bufordtpisser for the engine that got Barney back on the road. Had to drive a few hours, but got the motor with a tranny and a new grille for the car. Also, got my...
  5. 1wykdmk8

    Attention Upgraded Ray Kit owners!!!!!!!

    To those of you that have purchased my upgraded kits. Please either inbox me here or send me an email. I need to send you an upgrade to the upgrade. This is VERY important. Please email me or inbox me here. I will explain when you send me the inbox or email. This upgrade is part of the...
  6. 1wykdmk8

    Got some snow???

    Here are a few pix of Doc's Mark VIII.....anyone lookin for a good snow mobile ramp??
  7. 1wykdmk8

    Lookin for HID's????

    Figured I would let ya know....if ya did not already....that there is a complete set of HID's (not sure if he has or is sellin the ballast with them....you will hafta ask) for sale on ebay right now. He has each side on seperate auctions. Left side Right side Good luck if anyone...
  8. 1wykdmk8

    Ray switch kits now available.....

    For those of you that were interested in purchasing some lowering kits from me, I have enuf parts available to make 8 upgraded kits. Here is the definitions of the 2 kits that I offer..... Now, I offer 2 different kits......the basic kit, and an 'upgraded' kit. Here are the differences...
  9. 1wykdmk8

    Another happy switch kit customer

    I had a guy drive all the way down to Pittsburgh from Syracuse to have me not only sensor lower his car, but to install one of the kits that I sell (will be up and selling them again soon). He is a new member and his screen name is numarelucru. Here are a few pix of his car......first 3 are of...
  10. 1wykdmk8

    Hmmmm....could this be my problem.....

    Have you ever seen this before......and do you think this is the reason that my motor will not run??
  11. 1wykdmk8

    SpeedHut gauges at night.....

    I had to send the tach back to Speedhut because I pulled the wires off when I was installing the faces. I finally got it back today and put them in......here they are lit up at night..... :Beer
  12. 1wykdmk8

    Attention: recent 'Ray Kit' purchasers

    For those of you that have purchased the lowering kits from me recently I will have them built and out before the end of this week. As most of you know, I was in the hospital until last Saturday and now that things are looking up, I will get them built and out to ya! I apologize for the...
  13. 1wykdmk8

    Got my SpeedHut Gauges today......... :)

    Got dem gauges today. They look SO sweet! I can not wait to put them into the car and put some power to them to see what they look like lit up. I took a few pictures of what they look like straight outta the box....... Now, the ONLY thing is that my speedo has something a bit custom on it...
  14. 1wykdmk8

    To all Gen 1 owners who pre-ordered the indiglo gauges.............

    I JUST got off the phone with the ppl at Speed Hut, and if you are interested in having the Lincoln symbol anywhere on your gauges (even if you have already made your order) you can at no charge. I sent them a jpg file of the lincoln symbol, and the sales ppl (Juliana to be exact) informed me...
  15. 1wykdmk8

    Attention ALL Gen 1 owners....

    Ok, not to be out done by Eric and the Gen 2 owners, all we now need is 8 more ppl to get the indiglo gauges off the ground from SpeedHut. I have been trying for over a year to get these things off of the ground, and we only now need 8 ppl to sign up for them. It will ONLY cost you $1 to...
  16. 1wykdmk8

    Attention ALL Gen 2 Owners....

    Well, at least for all of you that were looking for the indiglo style gauges for your car.......Eric just purchased a parts car Gen 2 Mark VIII, and is willing to part with the gauge cluster so that SpeedHut can start getting the gauges done......Here is his post So, any of you owners that...
  17. 1wykdmk8

    Got tired of fixin the dreaded "Door Ajar"

    So, after spraying about 2 cans of WD-40 into the door jambs over the past few months, I decided to fix the problem once and for all. I simply cut the wire, not only to the message center, but to the anti-theft, and keyless entry modules. I can open the door and it does not give the alarm (of...
  18. 1wykdmk8

    What Octane rating do you use in your Mark VIII?

    I use what is recommended by the manufacturer.......premium! Anything less IMHO is not a bright idea.....you MAY save $100 thru the whole year.....how is that savings? Sorry, but this got me going from another website....and I just want to see who post here what they run in their car.....
  19. 1wykdmk8

    Barney back on da road!!!!!!

    Well, sorta. I have an oil leak on the drivers side (freakin valve cover gasket.....go figure), but other than the leak....which is REAL BAD.......the car runs.....should be totally fixed tomorrow......lost my patience with it, and gave up....been workin on it for too long.....LOL...but Barney...
  20. 1wykdmk8

    New Motor

    Well, for those of you that know, I had to buy a new (well new to me at least) motor because of a problem with my motor. So, I picked up my new motor the other day, and started cleaning it (it has been sitting in a salvage yard for some time...so there is ALOT of corrosion on the block and...
Back
Top