Search results for query: *

The first thing I would do is to have the codes read for free at AutoZone or somewhere like that and see what shows up. Things it could be are bad VSS, ABS (or wiring for ABS) module, or speed sensor. ABS module is in the front, behind the fender well lining on drivers side, and is most likely...

I'm with Driller on this. Park on a slight incline so the so the cap is at it's highest point. Not always necessary, but it does help a little. As for the cap, I had one stuck once, and I used a big set of channel locks. Grab the very top edge of the cap and squeeze tight. Having the extra...

Well, there was a time when I pulled my tank on the 94 I used to have, and someone had replaced the fuel pump with a smaller size. They had left the retainer clip off and the pump was pretty much hanging inside the tank by the plug. When I grabbed it, the plug came loose. But yes, there is a...

I honestly don't get online often, and when I do, going onto a forum is even more rare. I have been a member on LVC for a long time and didn't even know this thread existed. I scroll down to Mark VIII, and that's where I stop. Anyway, I'm not sure how much you want to spend, but the cheaper 6X8...

Went to the tint shop and had Nano ceramic tint (50%) put on the entire windshield. It took the tint guy nearly 2 hours, but I can't find one flaw. Wish I had done this long ago.

Try resetting the inertia switch. It's in the trunk, and check fuse and relay.

There are clear housings on eBay for sale. I think Jay has them. I'm on my second HID kit in 13 years. Kensun 9005 with 6K bulbs Housings on eBay HID relay harness <----- you will need this to prevent any flickering. I have 2 kits installed for highs and lows. I have absolutely no problem...

You're welcome! I'll check back and see how it went.

If you let it air up, and you get out of the car to turn the switch off, the car will only vent down when the door is shut. It doesn't always vent immediately, but it can... It could be within 5 seconds, or minutes later. The air ride is active for 45 minutes after the car is shut off. You...

Ther other thing it could be, is on the top of your air shocks, there is a rubber bushing where it mounts. Those have been known to leak, but rare. You can take the shock tower cover off and spray soapy water and look for bubbles. It's likely only a problem with one of them, and not both. When...

Your front air shocks are cracked around the edges where the car would normally sit at parked height. Two days isn't bad, but it will get worse with time. When you turned the switch on and let it air up again, it usually will go above where the parking height is. What you done was turned the...

I would also say you have a vac leak, as for the fuel economy. At the same time though, it sounds like you have what we have always referred to as torque converter shudder. Someone on here back in the day always swore by some stuff called (Dr. Tranny). LubeGuard 19610 Dr. Tranny. Comes in a 2oz...

If one bag is factory and one is new, my guess would be that the o-rings got damaged when you replaced "the one". If it's not able to hold its air, the old one likely has cracks all the way around from sitting for so long (33,000 miles) and it's unable to hold the weight of the entire rear end...

I think this was what was being used

Yes, it'll work

I bought one from Carlos. He'll send you whatever color you ask for. I think his eBay name is racebronco or something like that

A lot of the guys went with the 55 watt and none ever experienced the plastic melting. This even goes for the Gen 1 housings, which are smaller and closer to the plastic. Gen 1's originally came with 65 watt halogens, which produce too much heat and they eventually burned the inner chrome. I...

No problem. Been a while since I've been on here and this has been a boring weekend lol. I'll probably be popping back in next weekend.

Washed the hell out of it, after having 7 1/2 inches of rain so far this month.... More coming on Tuesday but at least it'll be clean for a couple of days.

Seems to be correct. They make them with blue gasket and orange gasket. Many have said that the orange gasket was better but I don't remember their reason. There are many many write-ups on this and it is definitely not a fun job, whatsoever.