Recent content by fudge12

As a rough fix, try redirecting all grounds to another ground on the chassis. If not, try running a direct 12v power source to the battery. Looks more of like a databus fault though.

What's the current cluster doing? When I used to have my LS and I used forscan, there would be a code for SCP Data Fault in the IC section. However this was not an actual problem since I had no issues. This code appeared across all 3 of my LS's. If you are having issues with the module not...

Forscan has an option for bleeding the ABS module... probably sets you back $15 for a usb ELM adapter.

If the arc was that bad, pretty sure the mega fuse is toast

Did that with my first LS when I was gutting it out getting it ready for the junk yard. Surprisingly enough there wasn’t any damage other than the seats going forward when I pushed the switch backwards lol. Swapped it back and she started right up with no issues

Thank you Joegr for the diagrams. Now one quick question, would the harness/wires exist under the seat if the car never came with heated seats?

hello all, I’m in the process of installing some heat elements in my gen 1 LS. CAn anyone provide me the link on how to remove the leather? I saw it here a while back and cannot find it again. Also, a pin out diagram for the harness under the seats would be nice. Thank you all!

Remove the rim and check if the hub spins freely. If yes, perhaps your new caliper is touching the rim. If no, remove the caliper and check if the hub spins freely. If yes, check your caliper to see if you’ve compressed the piston In completely and evenly. Verify if the pads are correctly...

Interestingly enough when poking through the instrument cluster using forscan, the option for beltminder was set to disable. Changing the value to enable did nothing. Guess the 00's aren't capable.

Just tried the steps, the seatbelt light does not illuminate after steps 1 through 5.

Hey all, I'm giving my cousin the LS for the weekend and would like to enable the seat belt reminder option. I remember trying to do it on my first LS (00 v6) but to no avail. I currently have another 00 v6 LS and am curious if it will work or if I will just be wasting my time. Was this ever an...

Hey all, since I've bought my current LS i had multiple codes for o2 sensor bank 1 sensor 2. Replaced it and now im left with P1151. I've searched on the boards that lead me to check for vacuum leaks of which none were found using a smoke machine. I need some advice on how to trouble shoot this...