Recent content by bxstang20000

Nope still have the hood. $30 plus shipping.

Hey guys tried to make a quick slide show this has about 20 pics of most the items. Here is the link:: http://img687.imageshack.us/slideshow/player.php?id=img687/9543/1269385750ya0.smil Thats an old bumper the lights were not scratched. BTW I have sport bumper off the car sitting in the...

OK cool ill take some pics tomorrow do you have an e-mail address? Check your PM

I was just about to respond to your PM. The car is in my driveway in the Bronx. You could come by to see it whenever is good with you. I’m about 1/4 mile from the East Tremont exit off I95 in Pelham Bay. Ill PM you my address if you want to check it out.

Hey guys sorry for the late response. All the prices are negotiable. First car I'm parting out. Only problem is I dont have much space at my house and I need to get this thing gone ASAP. Hopefully some of you guys could get some good parts for a good price... $275. The hood is in very good...

As the title states I’m parting out my 2002 Lincoln LS. Car is black on black and the interior is in great condition. Has a V8 motor with an auto and was in great shape and just did a complete tune up including the plugs, coils, and valve covers gaskets. I bought the car with 99K but the wrong...

Well finally spoke with the scum bags from the insurance company and they are saying 50/50 fault. I was arguing with them for half an hour last night because it makes no sense. I have no stop and she does. Should be clearly her fault. They say there are many other factors and the police report...

You need to do a parasitic draw test to see what device is staying on. That is a pretty large draw to kill the battery in 30 hours. What you need to do is disconnect the negative battery cable then put a wire in between the battery post and cable. Put your DVOM on the AMP scale first start of on...

I attached the belt routing diagram for the engine. The vane is on the back of the fan. Its the internal workings of the hydraulic fan. If you remove the four bolts from the back of the fan connecting the pressure line to the fan you will see the rotary vane. But if you didnt disconnect that...

Yes OBDII cars have 2 sensors per bank. There is one before and one after the cat. P0133 is B1S1 Circuit slow response. Usually this is either a bad sensor, exhaust leak, or wiring. With a scan tool you can read the data to determine what the sensor is doing. Normally it is just a bad sensor...

Could you turn the fan by hand? Did you pull the pressure line going to the fan where it meets the rotary vane on the fan itself? The vane has a front and a back one side has a small indent could this be installed backwards causing there to the wrong clearance and not turning the fan. Also...

Get a test light and test every fuse to see if any are blown. When the harness broke both wires may have touched blowing the fuse. Easy place to start...

The DDM kits are very good. Ive installed six kits so far and never had any issues. I've only used the slim ballast kits. I wouldnt go over 6000K. I have 6000K in my truck and they are a crisp white/blue but anything over that will be blue and will decrease light output. stallone 81 - 55W...

Yes it is a sealed bearing - no greasing. Jack the car up and see if there is any play in the bearing or other suspension components first. Also rotate the tires just to rule out you dont have a bad tire. I would start there. After replaceing the hub bearing did the noise completley go away...

Hey guys towed it to the body shop and he thinks its going to be totaled but the adjuster should be going there beginning of the week. If its close they will just total it because of the suspension damage. I think I might look at getting a 03+ LS or Mercury Marauder. NickT88LSC - I actually...