Recent content by Brock

"go post-MAF injection and get a full tune for it." Which is exactly what I had to do when the original by-the-book setup resulted in a temporarily frozen sensor. Once rerouted, and combined with a 2.5 hour dyno tune, it was fine.

Small Claims court usually goes up to $5K, and you don't need a lawyer. Forget about the grass, it doesn't have anything to do with your case.

"What impresses me the most is the "blue line" reading with the tune. 20hp and 40ft/lb's with an aftermarket tune is amazing. Can't wait to get an Xcal." Jayce 1971: The tune that came with it produced 232.45 HP and 257.64 TORQUE. That DYNO shop then told me I should go to FastLane for...

"The place probably just shoved a tailpipe sniffer up his tailpipe and that was that. That is how most dyno shops do it." That is how the first shop I used did it, and FastLane is closed now. ILLS: what is the alternative?

"Any chance you could post a pic of how you have it plumbed in?" Copied and pasted from my photo gallery below. COMPUCAR Nitrous In Bag EFI Dry Kit 100 HP NX NOS, KKM Tru-Rev Sport Induction Kit, SCT Xcal3, and Custom 2.5" Magnaflow exhaust system. Nitrous Setup Pictures...

http://www.contour.org/ubbthreads/sh...=&fpart=1&vc=1 I went there, and to my surprise, the motor is done in Marshall, Virginia, a town of only 600 people where I grew up as a boy. A small, small, world.

I don't think black would look correct.

"The motor is too high a compression ratio to use anything below 91 octane." Exactly, 10 3/4 to one. ('04)

I believe you're going to have to take it to the dealer. I assume no idiot lights are on. My '04 A/C was blowing cold on one side and warm on the other. It was at 48K, so the dealer repaired it, whatever it was. I do know it took many hours, not something cheap, I imagine.

I thought this was a good explanation. Hopefully, it is 100% correct. http://www.racingjunk.com/s/NitrousVsSuperchargers

"more of a deep howl." Good description.

"just installed KKM intake on 2004 LS V6" I have it on the V8 and it is definitely louder which I understand is normal. I'm not sure about the "whistle" noise you are hearing.

"......it also gets methanol where it would ordinarily get gasoline." Now that you have posted this, your previous "tooting" of the NX system makes sense!

Mustang I would go with the Mustang. You can do so much with them, and so much is available. The below link is where they Dyno tuned my LS. They had never worked on anything, but Mustangs before. You can see what they have done with them. Some over 1,000HP...

? One of my son-in-laws has a 4.0 turbo Jag and is worried about the plastic cam chain tensioners breaking. He states that the best price he has gotten is $2,500 because of the labor involved. He also mentioned that if it jumps more than one tooth, then the motor is gone. I was curious if...