Recent content by Bizw0z UK

thanks 97t. the hotel have said i can get anything i like sent there. Great result as it means i dont have to take the old core out in my suitcase, just pay a bit more for the recon unit. I heard that MOOG is top of the range for suspension and steering? Is that still the case? If so, does...

Near to boarding the plane later this week, i wanted to bring back a replacement steering box back with me. I have looked at rock and all of theirs require an exchange core. I dont particularly want to pack a filthy core in my suitcase and leave the pump dry for two weeks. Can anyone...

Yes mate, i tried Arnott. They said they would replace broken clips if i had ordered the airsprings from them direct (Via ebay i guess)... Not much help for me but may help some of you in the US who do buy direct.

does this mean nobody sells replacement clips?

does it start up shortly after you switch the AC on? I was told that was a good test

Hi all, I seem to be gathering a few arnott industries airbags that all have something in common, the base clip snapped taking it off. Anyone know where I can get these clips from? very many thanks Biz

i was reading the haynes manual and got some advise from the guy that shipped my car. Do the c clips wear? if so, could that be the reason the movement is more? another thing I saw was that there are O rings, are these basically shims to pack out the axel shaft to take up this excessive...

The problem is.... How do I prove it... Can anyone point me towards a lincoln document that will prove that 2mm movement is fine. So is there no way to reduce the slack. I guess I may be able to shim it somehow, just to get through the test. Bryan

Need your help oh wise ones. I was taking the rear wheels of the car when i noticed there was a lot about 2mm of play in the shaft (eg, the wheel moves in and out by 3mm or so.) on both wheels. I have done all of the searching I can and found it maximum should be 0.762mm for axel shaft end...

Thanks abe, Yeah, I would the adjuster above right in and it still wouldnt go over. I wonder if the shoes were a few thou over spec. solution was.... facemask, dremel with grinding stone, lots of dust and trial and error (with a bit of kicking the drum) You will all be cringing now, (HE...

Just drums matey. I seem to have 1 solid wire going front to drivers side rear, then a second sprung cable going off to the passenger rear. I could loosen the sprung one easily but the other!!!!! Have to take my bosch sander up the yard with me ;-) cheers for replying

Hello all, Im stuck, and so will my brake drum if I cant get some enlightenment from you guys. I had to change my brake shoes this weekend. Passenger side was fine, loosened the spring on the parking brake, changed the shoes, reassembled. LOVELY. Drivers side went fine too UNTIL I...

Nothing glows -yer battery is flat. ;)

I have looked around the UK at different companies and they either cant help or are REALLY expensive (cheapest about $160.00 EACH). I have also searched the web for companies in the US that have them. I CANT FIND ANY !!!! A friend of mine got his from ebay and they were great but he put all...

Thanks Guys Anything with an awesome rating gets my vote. I have contacted autoenginuity to check out if they ship to third world countries like the UK. Dereck, If its as good as quik ls says it is, i will nip down to somerset from london and show you it. Its handy to have good...