Recent content by bhans40

Thanks for the info.....I'm contemplating going BACK to springs

Wondering if putting these on my car if it also stiffens up the ride.....Since changing back to air the car seems to be riding rough....Just curious

Thanks for the comeback......I found the problem.....In the past I've said I will NEVER work on my car again and at the time I ment it,I still do but even more now.....Old adage says "When ALL else fails read the instructions".....Excellent saying. Bruce L. Hansen.....Senior...

My struts quit working so I bought another set......On the new set I have no trouble putting the lower ball on the new one.....My problem is I CANNOT put the upper ball on.....Name of the strut is STABILUS LIFT-O-MAT..... Tried all I could think of to get it on.....NO JOY! I'm going to check...

I wouldn't mind this at all....Although I do not have any of the trouble shooting manuals....I have found in the past that if I went to GOOGLE and imputed what I was looking for I could usually find the info I needed....You may also go ahead and purchase the manual

It's 12 volts

98 Mark VIII that had OEM Code ZY light Prairie Tan interior......Swapped out both seats and the rear back rest with Collector Edition seats and back rest. They are 2 tone with Prairie Tan seat material and light gray inserts....Really looks good.....Anyone tell me what the code for this...

For a 98 Mark VIII. The wood grained light control surround. The same color as the rest of the wood grain in the car.....Mine went away.....I have all of the rest of wood grain except for this one.

Well, I replaced all of the height sensors and so far all is good. The ride is a whole lot better now without the banging of the suspension.....There is one aspect of this conversion that I don't care about, actually two.....1) I think I would have better off leaving everything alone.....2) The...

Thanks again slowmkviii for the advice.....I have made a decision about what I'm going to do with this problem.....I purchased (2) two nos front sensors and (1) one used rear.....I paid the price gents and I'm hoping this will fix my problem.....IF not, I'll probably sell the car......There is a...

Thanks slowmkviii and diller for the info.....So I'm going to go under the assumption that the height sensors are NOT working properly.....Unless someone doesn't think I should I going to try to find OEM sensors especially the Ford part number for the rear.....Don't want to pay the...

Ok after a little more checking the code is 99. Looking at the error code chart there was no PPT designation (K) or L or P or Q. Would the PPT help narrow down the area of trouble?.......Bruce L. Hansen.....Senior Citizen..... Alive by the Grace and Mercy of GOD

I really,really need the discussion on the different part numbers for the height sensors......If all 3 sensors can be the p/n for the front height sensors why's ford calling for a different p/n for the REAR? I did run the system check with the Star tester.....The only code it showed is...

Thanks again slowmkviii. I'll see about running the Star test again, I too think there is a possibility of a bad sensor.....Don't really want to pop $180+ for NOS but if I need to do this I will.....Question: Lincoln calls for 1 part number for both front sensors and a different 1 for the...

I drove the car Monday. Put over 100 miles on the car and the light came on once....I don't know what I'm going to do as the system is really stiff and doesn't feel like it's functioning properly..... Bruce L. Hansen.....Senior Citizen......Alive by the grace and mercy of GOD