New Best @ Atco Tonight

Congrats on your new best and gen 2 NA record. Impressive for just having a "small" 3600 stall.
 
I hope by the end of this summer i will be in the running for quickest gen 2 N/A mark. DLF and kirk, did you install your stalls yourselves or have someone do it?
 
mossbergman said:
I hope by the end of this summer i will be in the running for quickest gen 2 N/A mark. DLF and kirk, did you install your stalls yourselves or have someone do it?
Click to expand...

Well, good luck! :cool:

The only thing I haven't done myself is the alignment. ;)
 
Unlike Doug, I humbly admit I have not done any of the work. If only I had a hoist. That is why I am turned off to the idea of wrenching on this thing.
 
Awesome time
did you have good consistency in your times that day.
Cut that light a little to much I see must have been to excited to run a record.
 
KStromberg said:
Unlike Doug, I humbly admit I have not done any of the work. If only I had a hoist. That is why I am turned off to the idea of wrenching on this thing.
Click to expand...

If you don't mind me asking, how much do you have tied up in the stall and the install?
 
Do we have an official all motor list? I know they had one on LOD...
 
DLF= mad scientist

Under his car looks like NASA engineers just got done with it. Have fun trying to beat his times.
 
slowmkviii said:
Awesome time
did you have good consistency in your times that day.
Cut that light a little to much I see must have been to excited to run a record.
Click to expand...

Here's a list of last night's runs. Naturally, the only time I left too soon was on my best pass. :(

__60'__1/4 ET___MPH___RT

1.907 13.335 @ 103.52 .163
1.898 13.307 @ 103.67 .075
1.920 13.414 @ 103.34 .073
1.911 13.362 @ 103.26 .028
1.889 13.304 @ 103.72 -.051
1.920 13.367 @ 103.34 .059
 
Last edited:
I to, would like to know what's all done to the car. Trying to figure cost-effectivness, compared to my brother 97 gt, which runs 12.5 n/a.
 
mossbergman said:
If you don't mind me asking, how much do you have tied up in the stall and the install?
Click to expand...

The stall I purchased from Lonnie over at Blue Oval Chips. It's a CircleD Stage2 10" and was $750.

The install? I wouldn't know for sure as I had a bunch of things done all at once. I would guess in the ballpark of $400+ to have the tranny dropped and have a stall put in.
 
joeynat said:
DLF= mad scientist

Under his car looks like NASA engineers just got done with it. Have fun trying to beat his times.
Click to expand...

Indeed he is.

I was only a bit more than a tenth behind him until this latest fiasco. That's what it's all about though really is getting out there and having fun. There is a lot left on the plate with my car especially with tuning. I know I can get closer to his times again, I just don't know HOW close. I also have 145K miles on this car. :D

I've decided that I'm going to set the shift points up even higher yet. He's been shifting at 7000 rpms out of first and I've been shifting at 6600-6700.

One thing I can say for sure is that I will beat my current time this year.

So I wonder what people would think if there was now two Gen2s at the top of the NA list. :D
 
DLF said:
Here's a list of last night's runs. Naturally, the only time I left too soon was on my best pass. :(

__60'__1/4 ET___MPH___RT

1.907 13.335 @ 103.52 .163
1.898 13.307 @ 103.67 .075
1.920 13.414 @ 103.34 .073
1.911 13.362 @ 103.26 .028
1.889 13.304 @ 103.72 -.051
1.920 13.367 @ 103.34 .059
Click to expand...
Wow consistently fast. I'm starting to appreciate being supercharged there is less competition.
 
You must log in or register to reply here.

Members online

No members online now.
Total: 62 (members: 0, guests: 62)
Back
Top