Top 50 Mark VIII Parts

GMAN

GMAN

Dedicated LVC Member
Joined
Jan 26, 2005
Messages
4,743
Reaction score
31
Location
Spring, Texas, United States
As years go by, and the ownerships thin out, and more and more Marks are being crushed, I am compiling the top 50 parts that are highly sought after now, and will be in the future. What are your ideas and suggestions?
 
g2 evap tray
cupholder
f+r lights and led turn signals
vcrm
window switches(covers)
indash cd
amp
drivers side seat track
tele steering wheel
intech cover
 
gen 1 lsc moldings and bumpers
 
Grilles
corner lenses
side mirrors that haven't leaked and showing dim.
some people need front license plate holders.
bottom plastic seat trim in various colors.
sun visors in various colors 94 visors are not plug and play for 95's, I do know that.
cross over tube caps that aren't stripped.
front air shocks if new looking. never know what you will find in the jy.
coil over conversions
Octi center caps if in near mint condition. Others also.
Always check for new coils. Easy to snag them off.
EDIS module is a fairly high dollar part if someone was to need one.
Moon roof weather stripping, motors and covers. Track assembly.
and all mentioned above in other posts.
 
NoLimit95 said:
Grilles
corner lenses
side mirrors that haven't leaked and showing dim.
some people need front license plate holders.
bottom plastic seat trim in various colors.
sun visors in various colors 94 visors are not plug and play for 95's, I do know that.
cross over tube caps that aren't stripped.
front air shocks if new looking. never know what you will find in the jy.
coil over conversions
Octi center caps if in near mint condition. Others also.
Always check for new coils. Easy to snag them off.
EDIS module is a fairly high dollar part if someone was to need one.
Moon roof weather stripping, motors and covers. Track assembly.
and all mentioned above in other posts.
Click to expand...

;):D

Yea, I think this is a pretty solid list. I would say pretty much any interior part that you use on a daily basis. Multifunction switch?
 
Subframe bushings and plates :(

O/D switch

The plastic trim bolted to the dash above the column on a 1st gen

Message center buttons

EGR pipe
 
Greg, anything wood grain in near mint condition and black, without the rubberized coating scratched off it. Rear ashtrays is something I have ben asked for and another thing. Gen 2 shifter assembly. I have had one here and you wouldn't believe how many pieces I have sold off that thing to 3 or 4 different people.

Gen 1 ashtray and cup holder doors that actually work, in various colors and wood grain. Stereo and EATC wood grain bezels in mint to near mint condition. I would buy one of those now if someone had one but it would have to be no less than a 9 out of 10 in condition.

Black headliners, with and without moon roof opening, if in good condition.

Take something with you to cut metal with and cut out rocker panels everyone asks for all the time because theirs are rusted out. Couple of pair of them should do for a while but as the years pass, they will be sought after. I'm going to start checking my local yards too. Since we're in the south, rust normally isn't an issue.
 
It's like a Beginner Hoarder thread ;)

If
You own a Mark 8, just go get another one, you'll one day need all of
It's parts, and then some

Yet i regress, I've got a small corner closet in the shop that I've got a few
Boxes and tubs of parts, there's even a Gen 1 LSC bumper in there :D, and some LSC moldings lol
 
Sapperfire said:
It's like a Beginner Hoarder thread ;)

If
You own a Mark 8, just go get another one, you'll one day need all of
It's parts, and then some

Yet i regress, I've got a small corner closet in the shop that I've got a few
Boxes and tubs of parts, there's even a Gen 1 LSC bumper in there :D, and some LSC moldings lol
Click to expand...

is it a front bumper?
 
Yup, my spare, unless you wanna come pick
It up for $150, yes I said pick it up

Air bags are quick and easy to get, and a great grab, also the front SRS sensors. ECUs, abs sensors, clock springs, the tiny black cover for the side view mirror
 
Sapperfire said:
Yup, my spare, unless you wanna come pick
It up for $150, yes I said pick it up

Air bags are quick and easy to get, and a great grab, also the front SRS sensors. ECUs, abs sensors, clock springs, the tiny black cover for the side view mirror
Click to expand...

I cant pick it up. I work to much to leave the state. If you decide you want to ship it let me know.
 
Sapperfire said:
It's like a Beginner Hoarder thread ;)

If
You own a Mark 8, just go get another one, you'll one day need all of
It's parts, and then some

Yet i regress, I've got a small corner closet in the shop that I've got a few
Boxes and tubs of parts, there's even a Gen 1 LSC bumper in there :D, and some LSC moldings lol
Click to expand...

LMAO I like how you think Sapperfire... :D
 
I'll be increasing my inventory list in the next few months. I'll use this list to start the inventory. Eventually everyting will be available from screws to lights, EATC's to trunk lock covers. FYI, I have a mint trunk cover for for anyone who needs one.
 
Other things that only seem to affect us in the snow belt:

Rust-free A/C discharge line (the one with the muffler on it that drops down in front of the engine) - These can rust through where it hangs down and are not avail anywhere.
Good door window run channels - These get rust under the rubber coating at the top rear corner and bubble up badly. I cry when I think of all the ones going to the masher. Granted they'd be a PITA to ship, but hey.
 
stu said:
I cant pick it up. I work to much to leave the state. If you decide you want to ship it let me know.
Click to expand...

Sure, you're #7 on the list of people wanting it that also can't pick it up... It'll sit in my closet and be my grand-Kids spare bumper before I decide to ship
It
 
You must log in or register to reply here.

Members online

Total: 148 (members: 1, guests: 147)
Back
Top