97 Driver's Settings Issue

[UltimateSVT]

Ok guys, I have a minor concern. Every time I start my 97 the driver's settings is "OFF". I always have the "2" position set for me & no one uses the "1" position. The first couple months since I bought the car it would always be on my settings unless I would change it just like on my current 93 & on the cordovan 97 I used to own. Now it's always OFF so every time I start the damn car I have to push the "2" so everything conforms to my position. Any ideas why? Does it have to do with the key?

 

[lsc 98 f100]

key fob?

 

[TheBigRedOne]

If you unlock the door with a #1 keyfob, it will set to #1 settings. Does the fob have a switch on the back?

 

[UltimateSVT]

If you unlock the door with a #1 keyfob, it will set to #1 settings. Does the fob have a switch on the back?

Ummm... uuuuuhhh... It was in the "OFF" position! :shifty:

 

[keatonsdad]

Problem solved! Lol.

 

[UltimateSVT]

Problem solved! Lol.

Guess what? NOPE! Problem isn't solved! I think the issue is definitely the key fob but now my seat slides half way forward & brings the rear way up when I lock the car. When I open the car the seat stays there at that position. I click on "2" & it goes back to my setting... Unless that retarded forward position is position "1". I will try again this afternoon when I leave work.

 

[TheBigRedOne]

Your key fob may be

Guess what? NOPE! Problem isn't solved! I think the issue is definitely the key fob but now my seat slides half way forward & brings the rear way up when I lock the car. When I open the car the seat stays there at that position. I click on "2" & it goes back to my setting... Unless that retarded forward position is position "1". I will try again this afternoon when I leave work.

If the part number on the back of the fob has an AA at the end it is for position 1 and if it has BA it is for position 2. Check that.

Remote Control System **OZ-15K601-AA Type 7-(symbols) lock, unlock, panic, trunk-Memory #1 Dk Graphite, 1995/ 1998

Remote Control System **OZ-15K601-BA Type 8-(symbols) lock, unlock, panic, trunk-Memory #2 Dk Graphite, 1995/ 1998 1

 

[thaywood]

I have the exact same problem on my '97 LSC. My key fob remote has an AA at the end. But my settings are always off when I get into the car and I have to press the 1 to get it everything back to my settings. It's mildly irritating.

 

[TheBigRedOne]

I have the exact same problem on my '97 LSC. My key fob remote has an AA at the end. But my settings are always off when I get into the car and I have to press the 1 to get it everything back to my settings. It's mildly irritating.

I never use the memory settings since I am the only one who drives the car. I have it set to off in the door as well as on the keyfob

 

[Modular97LSC]

When will the problems end...right alex!!!!

 

[97MarkJA]

Just set 1& 2 to the same position and save it.

 

[UltimateSVT]

When will the problems end...right alex!!!!

Ummm, you know the answer to that one... the problems end the day we sell our Marks... & I have 2 of them so that's 2 headaches! lol

Just set 1& 2 to the same position and save it.

Going to do that this evening. It's acting weird. I'm also going to try out my other key just in case. Might be a key issue.