4r70w Tail shaft length

mistermaclincoln

Well-Known LVC Member
Joined
Feb 3, 2009
Messages
330
Reaction score
0
Location
Tacoma
Hey everyone! I am on the hunt tomorrow on a 98 - 04 transmission and the question came up of how long the tail shaft was on my 95 transmission. Anyone know how long the orginial 95 tranmission tail shaft length is. Also, is there any difference between a Police Crown Vic tranny and the Mark 8?

Thank you,

Seth
 
Hey everyone! I am on the hunt tomorrow on a 98 - 04 transmission and the question came up of how long the tail shaft was on my 95 transmission. Anyone know how long the orginial 95 tranmission tail shaft length is. Also, is there any difference between a Police Crown Vic tranny and the Mark 8?

Thank you,

Seth

Never measured the length of mine but this is what it looks like.

TransSwap004.jpg
 
There are 2 lengths available.

Mark VIII = short tailshaft
CVPI = long tailshaft

That was the reason for his question because he was wondering if police Crown Vic trans tail shaft. (Came in a PM)

While we're on the subject, lets say I was able to get a 99 Crown Vic trans and it had the longer tail shaft, would my 95 shaft bolt onto the 99 or is there problems with that?
 

Members online

Back
Top