FS: Seperator Plate Gaskets(2) for 4r70w J-Mod
- Thread starter martz0r
- Start date
martz0r
Active LVC Member
Come on, someone's gotta want to do a j-mod.
keatonsdad
Dedicated LVC Member
what year are they for
NoLimit95
Dedicated LVC Member
I would imagine they should work on 93-95 and maybe 96
martz0r
Active LVC Member
My bad guys, I meant to say PM me in my post as I have a few FS threads on different forums going at the same time and it's easier. Not sure about the Gen II Marks. I can give Ford a call tomorrow.
95mark8newyork
Dedicated LVC Member
Not to go off topic but +1 for bush's baked beans lol
martz0r
Active LVC Member
Indeed... Also works great for a fuel catch can when I change fuel filters.
:I I called Ford and gave them the part #s that I had and asked if they would work on a 98 Mark. He said he didn't know but was showing updated part #s of XW7Z7Z100AA and 1L3Z7C155AA for the 98. After that I hopped online and found your post from a different thread with the picture comparing the two VBs and obviously 98's won't work:
Look at these differences in a 98 plate ON THE LEFT and a pre- 98 gasket ON THE RIGHT. Picture speaks for itself.
97 is still up in the air but 93-96 should be a go. All I know is I ordered these for my 93 but I'm selling it to a friend so there is no need for them anymore.